Installation Instructions

Track Screw

Toggle Bolt

Track

Wooden Ceiling

Wall Plug

Track

Cement Ceiling

Track Screw

* For wooden ceiling:

1. Position the track below the outlet box where it is

to be installed.

2. Mark the location of the 2 track mounting holes at

each end of the track.

3. Drill 2 holes at the marked place.

4. Secure the track screws through the holes of the

track and toggle bolts. Then attach the toggle

bolts into the holes of the wooden ceiling until the

toggle bolts are locked.

* For cement ceiling:

1. Position the track below the outlet box where it is

to be installed.

2. Mark the location of the 2 track mounting holes at

each end of the track.

3. Drill two holes at the marked place.

4. Insert the wall plugs through the holes of the

ceiling, then attach the track screws through the

holes of the track, and secure the track screws

to the wall plugs.

349-6381 / 349-6382 / 349-6394 / 349-6419 / 349-6420 / 349-6433

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Customer Service: 1-800-887-6326 (weekdays 9 a.m. – 5 p.m. CST)

3. READ AND SAVE THESE INSTRUCTIONS.

Quantus Lighting