NON PENETRATING ROOF MOUNTS PTX-NP400 PTX-NP550 PTX-NP658
LIMITED TWELVE (12) MONTH WARRANTY This PATRIOT ANTENNA equipment is warranted to be free from defects in material and workmanship under normal use and service. PATRIOT ANTENNA shall repair or replace defective equipment, at no charge, or at its option, refund the purchase price, if the equipment is returned to PATRIOT ANTENNA not more than twelve (12) months after shipment.
PTX-NP400 ITEM # PART # DESCRIPTION 1 2 3 4 5 6 7 8 295000 295001 295002 295003 295005 295006 3HPPTXNP400 3HPPTXNP400DT ASSY,NP TRAY ANGLE BRKT,NP CORNER TIE ASSY,NP FOOT CHANNEL,NP LEG BRKT,NP DUALCORNER TIE (UNBENT) ASSY,NP400 PIPE PREBAG,PTXNP400 HARDWARE SINGLE PREBAG,PTXNP HARDWARE DUAL SINGLE TRAY QTY REV 0 0 0 1 0 0 0 0 8 4 4 4 0 1 1 0 DUAL TRAY QTY TRIPLE TRAY QTY 16 4 4 4 8 1 0 1 24 4 4 4 16 1 0 2 DUAL TRAY QTY TRIPLE TRAY QTY 16 4 4 4 8 1 0 1 24 4 4 4 16 1 0 2 PTX-NP550 ITEM # PAR
3 4 6 2 5 1
18 127 SINGLE TRAY 4 19 3 DATE TITLE: 2 ZONE REV. DESCRIPTION REVISIONS DATE 1 APPROVED A B 8 PTX-NP400 4.00 PIPE 193 TRIPLE TRAY 159 DUAL TRAY 7 127 SINGLE TRAY 6 54 5 PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PATRIOT ANTENNA SYSTEMS. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PATRIOT ANTENNA SYSTEMS IS PROHIBITED. ENG APPR. DRAWN BY: 4 FRACTIONAL 1/16" ANGULAR: 1 .062" X .031" XX XXX .
SINGLE TRAY ASSEMBLY 1) Lay out 8 NP TRAY ANGLE ASSEMBLIES (prt# 295000) 4 NP CORNER TIE BRACKETS (prt#295001) and 4 NP FOOT ASSEMBLIES (prt# 295002) as pictured to the left. NP Tray Angle Assemblies (prt# 295000) 2) Attach the NP CORNER TIE BRACKET (prt# 295001) as pictured to the left. DO NOT tighten hardware at this time.
DUAL TRAY ASSEMBLY 1) Lay out 16 NP TRAY ANGLE ASSEMBLIES (prt# 295000), 4 NP CORNER TIE BRACKETS (prt#295001), 4 NP FOOT ASSEMBLIES (prt# 295002) and 4 NP CORNER TIE BRACKET UNBENT (prt#295005) as pictured to the left.
TRIPLE TRAY ASSEMBLY 1) Lay out 24 NP TRAY ANGLE ASSEMBLIES (prt# 295000), 4 NP CORNER TIE BRACKETS (prt#295001), 4 NP FOOT ASSEMBLIES (prt# 295002) and 4 NP CORNER TIE BRACKET UNBENT (prt#295005) as pictured to the left.
Ballast Requirement Charts 1. Determine the Wind Speed requirement for the installation, and the Elevation Angle of the antenna. 2. Look up the required ballast for the antenna size being used. 2.4M offset Ballast Chart Elevation Ballast Required (lbs)at (Degrees) Specific Wind Speed (mph) 80 mph 100 mph 125 mph 22° 634 lbs 1370 lbs 2520 lbs 494 lbs 1069 lbs 1966 lbs 40° 285 lbs 617 lbs 1134 lbs 60° 3.1m Ballast Chart 1.8m Ballast Chart 3.
Grounding Grounding Antenna Feed Cables Coaxial Cable (to LNB) 1. Ground antenna feed cables in accordance with current National Electric code and local electric codes. The illustration shows a typical grounding method. Clamps that provide a solid connection between ground wire and a ground source should be used. Ground Block NEC Section 810 Ground Wire NEC Section 810 Coaxial Cable (to Receiver) Grounding Non-Penetrating Mount Frame 1. Ground the Non-Penetrating mount frame.
Records or experience indicates that the wind speeds are higher in mountainous terrain, gorges, and ocean promontories and shall be examined for unusual wind conditions. Contact your local meteorological authority and a local civil or professional engineer if your installation is in one of these areas.
Specifications Antenna Size Pole Size Materials Mount weight (single tray) Mount weight (double tray) Mount weight (triple tray) Ballast Load (single tray) Ballast Load (double tray) Ballast Load (triple tray) 1.8m through 3.1m 4” & 5-1/2” OD Powder Coated Steel 375 lbs 575lbs 775lbs 2700 lbs 5500 lbs 7500 lbs PATRIOT ANTENNA SYSTEMS 704 NORTH CLARK STREET ALBION, MICHIGAN 49224 USA WWW.SEPATRIOT.