LIGHT CONTROL KEYS 5 LIGHTING PROFILE KEYS MULTIMEDIA KEYS VOLUME/MUTE WHEEL USB/AUDIO PASS THROUGH PORT AIRCRAFT GRADE ALUMINUM CHASSIS 108 PROGRAMMABLE MACRO KEYS 109 KEY ROLLOVER ANTI-GHOSTING FULL SPECTRUM RGB 16 .8 M ILLION COL ORS FOR INDIVIDU ALLY CUST OMIZABLE BACKL IT KEY S 5 DEDICATED MACRO KEYS INTRODUCTION Thank you for purchasing the Viper V770 gaming keyboard. The V770 uses quiet mechanical Kailh Red switches for smooth linear feel and quick response times.
INSTALLATION HARDWARE INSTALLATION HARDWARE INSTALLATION Connect the keyboard to two available USB ports on the computer. Wait 5-10 seconds for the keyboard to be recognized by the computer. SOFTWARE INSTALLATION Please download the Viper software from the product page at http://www.patriotmemory.com to be able to create and manage macros, create lighting profiles, adjust latency, response time, and more. Once downloaded, double-click on the software to start the installation.
MULTI-MEDIA KEYS AND VOLUME WHEEL KEYBOARD SHORTCUTS Play/Pause Previous Track Stop Volume Up Next Screen Volume Down Previous Screen Mute (press wheel) Next Track
BACKLIGHT RECORDING MODES Record and Save custom LED Profiles BACKLIGHT RECORDING MODES Press any key in recording mode to illuminate it, making it part of your customized lighting profile. Press FN+F12 for F1-F5 to enter a blinking state in preparation to record a custom key configuration. Once in this blinking state, select any of the F1-F5 keys to assign a configuration. I.e.
WAVE/SPOTLIGHT/RADAR MODES Press FN+ -Continuously to alternate between modes FN+ -WAVE MODE LIGHTING EFFECTS A wave of light will travel across the keyboard. To change the direction of the wave pattern, press FN + arrow key. The wave will travel from right to left, left to right, top to bottom, or bottom to top based on the arrow key you select. FN+ X2-SPOTLIGHT MODE Two patterns of light will travel across the keyboard intersecting in the middle. The LED will change color constantly.
RIPPLE MODE SIDEWINDER/VORTEX MODES Press FN+ -Continuously to alternate between modes Press FN+ -Continuously to alternate between modes FN+ -RIPPLE MODE When pressing any key, the light pattern will be spread in all directions; displaying a “ripple” effect. Pressing FN+ repeatedly will scroll through the different LED colors.
BREATHE MODE Press FN+ Continuously to alternate between modes RAINDROP/REACTIVE MODES Press FN+ FN+ -RAINDROP MODE -Continuously to alternate between modes Keys on the keyboard will light up and fade randomly: displaying a “raindrop” effect. FN+ 2X-REACTIVE MODE Key will light up when pressed and fade. Pressing FN+ repeatedly will scroll through the different LED colors. FN + Pg Up or Pg Dn will decrease or increase the interval of the fade.
STATIC/SPECTRUM Press FN+ FN+ -SPECTRUM MODE Continuously to alternate between modes The entire keyboard will gradually shift through the various colors. Pressing FN+ repeatedly will scroll through the different LED colors. FN + Pg Up or Pg Dn will decrease or increase the interval of the fade. FN+PgUp Increases Fading Speed of Reactive Mode FN+PgDn Decreases Fading Speed of Reactive Mode FN+ X2-STATIC MODE The entire keyboard remains illuminated.
BRIGHTNESS MODES Press FN+ -Continuously to alternate between modes BRIGHTNESS Press FN+ FN+ increase the LED brightness. decreases the LED brightness to off.
LIGHTING SETTINGS PALM REST LIGHT EFFECTS Keyboard light effects The lighting effects for the palm rest are controlled exclusively through the Viper software and can be set up in the same manner as the keyboard lighting. Select the lighting effect from the drop down menu, and set color selection, brightness, speed and pattern direction from the menu and click on Apply to save the settings. The V770’s light effects can be set from the Viper software by selecting the effect from the drop down menu.
CUSTOM LIGHTING PROFILES RESPONSE TIME AND REPORT RATE You may create custom lighting profiles by selecting one of the five Lighting Profiles from the drop down menu in Light Effects. You may adjust the response time and report rate for the keyboard from the main menu. A lower response time will decrease reaction time, while a higher report rate will increase the frequency the keyboard communicates with the computer, decreasing reaction time. Check the box next to DIY to access custom color mode.
MACROS You may create and save 32 different macro scripts, of 47 characters in length that can be assigned to any key (except the Windows® key) of the keyboard. The V770 has five additional dedicated macro keys for convenience. Creating a macroClick on the Macros button from the main menu to open the macro editor. Delay between keystrokes – You may add delays between script keystrokes by checking the box next to Delay between keystrokes.
KEY ASSIGNMENTS Select a Lighting Profile and check the box on Keymap. This gives you access to the SELECTED KEY menu. You may assign specific functions to each key through the SELECTED KEY menu. • Single/Combine • Macro • Basic • Advance MACRO This allows you to assign macro scripts you have created and saved to specific keys. Click a key you wish to assign a macro to on the keyboard image (except for the Windows® key).
ADVANCE This allows you to browse various folders (i.e. music, photos), and assign functions to keys making them hot keys, including playing music, opening folder, start up function, and more. Click a key you wish to assign an advance function to on the keyboard image (except for the Windows® key). Click on the Advance tab from the SELECTED KEY menu and choose the function you wish to assign from the list. Click Save, enable GAME MODE, click Apply.
To create a user profile, follow the steps outlined above to custom color keys, and select and assign macro scripts. You may also adjust the report rate or response times to your preference. Click Apply to save them to the keyboard’s memory. To save a user profile, click on the Profiles button in the lower left corner, then click on the EXPORT button to access a folder you create on your PC’s storage device. Name the profile and Save.
GENERAL SETTINGS WINDOWS KEY LOCK FACTORY REST You may disable the Windows® key during game play by checking the box next to WINDOWS KEY LOCK, and then clicking Apply. To reset the keyboard to factory default settings, click on the setting icon in the upper right corner and then click Reset settings. The software will prompt you accordingly.
FCC and Legal: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.