Safety data sheet

ManualsBrandsPATTEX ManualsCare Products500 ml

Safety Data Sheet according to (EC) No 1907/2006

Page 1 of 13

Pattex Mould Remover spray

SDS No. : 433439

V002.1

Revision: 28.05.2015

printing date: 21.01.2016

Replaces version from: 10.04.2014

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Pattex Mould Remover spray

1.2. Relevant identified uses of the substance or mixture and uses advised against

Intended use:

Cleaner

1.3. Details of the supplier of the safety data sheet

Henkel AG & Co. KGaA

Henkelstr. 67

40589

Düsseldorf

Germany

Phone:

+49 (211) 797 0

Fax-no.:

+49 (211) 798 4008

ua-productsafety.de@henkel.com

1.4. Emergency telephone number

The Henkel information service also provides an around-the-clock telephone service on phone no.+49-(0)211-797-3350 for

exceptional cases.

Further information is available at Poison Control Centers.

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture

Classification (CLP):

Skin irritation

Category 2

H315 Causes skin irritation.

Serious eye irritation

Category 2

H319 Causes serious eye irritation.

2.2. Label elements

Label elements (CLP):

Hazard pictogram:

Signal word:

Warning

Summary of content (13 pages)

PAGE 1
Safety Data Sheet according to (EC) No 1907/2006 Page 1 of 13 SDS No. : 433439 V002.1 Revision: 28.05.2015 printing date: 21.01.2016 Replaces version from: 10.04.2014 Pattex Mould Remover spray SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Pattex Mould Remover spray 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended use: Cleaner 1.3. Details of the supplier of the safety data sheet Henkel AG & Co.
PAGE 2
MSDS-No.: 433439 V002.1 Pattex Mould Remover spray Page 2 of 13 Hazard statement: H315 Causes skin irritation. H319 Causes serious eye irritation. Supplemental information EUH206 Warning! Do not use together with other products. May release dangerous gases (chlorine). Precautionary statement: P102 Keep out of reach of children. P101 If medical advice is needed, have product container or label at hand. P261 Avoid breathing mist. P280 Wear protective gloves.
PAGE 3
MSDS-No.: 433439 V002.1 Pattex Mould Remover spray Page 3 of 13 SECTION 4: First aid measures 4.1. Description of first aid measures General information: In case of adverse health effects seek medical advice. Inhalation: Move to fresh air, consult doctor if complaint persists. Skin contact: Rinse with running water and soap. Skin care. Remove contaminated clothes immediately. Eye contact: Immediately flush eyes with soft jet of water or eye rinse solution for at least 5 minutes.
PAGE 4
MSDS-No.: 433439 V002.1 Pattex Mould Remover spray Page 4 of 13 6.4. Reference to other sections See advice in section 8 SECTION 7: Handling and storage 7.1. Precautions for safe handling Avoid skin and eye contact. Ventilate working rooms thoroughly. Avoid naked flames, sparking and sources of ignition. Switch off electrical devices. Do not smoke, do not weld. Do not empty waste into waste water drains.
PAGE 5
MSDS-No.: 433439 V002.
PAGE 6
MSDS-No.: 433439 V002.
PAGE 7
MSDS-No.: 433439 V002.1 Pattex Mould Remover spray Page 7 of 13 Respiratory protection: Not needed. Hand protection: In the case of longer contact protective gloves made from nitrile rubber are recommended according to EN 374. Perforation time > 480 minutes material thickness > 0.1 mm In the case of longer and repeated contact please note that in practice the penetration times may be considerably shorter than those determined according to EN 374.
PAGE 8
MSDS-No.: 433439 V002.1 Pattex Mould Remover spray Page 8 of 13 10.3. Possibility of hazardous reactions See section reactivity 10.4. Conditions to avoid None if used for intended purpose. 10.5. Incompatible materials See section reactivity 10.6. Hazardous decomposition products Heating causes decomposition and chlorine evolution. SECTION 11: Toxicological information 11.1.
PAGE 9
MSDS-No.: 433439 V002.1 Pattex Mould Remover spray Page 9 of 13 Skin corrosion/irritation: Hazardous components CAS-No. Sodium carbonate 497-19-8 Result not irritating Exposure time 4h Species Method rabbit OECD Guideline 404 (Acute Dermal Irritation / Corrosion) Exposure time Species Method Serious eye damage/irritation: Hazardous components CAS-No.
PAGE 10
MSDS-No.: 433439 V002.1 Pattex Mould Remover spray Page 10 of 13 Reproductive toxicity: Hazardous substances CAS-No. Sodium hypochlorite 7681-52-9 Result / Classification NOAEL P = >= 5 mg/kg NOAEL F1 = >= 5 mg/kg Species Exposure time oral: gavage Species Method rat OECD Guideline 415 (OneGeneration Reproduction Toxicity Study) Repeated dose toxicity Hazardous components CAS-No.
PAGE 11
MSDS-No.: 433439 V002.1 Pattex Mould Remover spray Page 11 of 13 12.2. Persistence and degradability Hazardous components CAS-No. Sodium octyl sulphate 142-31-4 Result readily biodegradable Route of application aerobic Degradability Method 91 - 94 % EU Method C.4-E (Determination of the "Ready" BiodegradabilityClosed Bottle Test) 12.3. Bioaccumulative potential / 12.4. Mobility in soil Hazardous components CAS-No.
PAGE 12
MSDS-No.: 433439 V002.1 Pattex Mould Remover spray Page 12 of 13 SECTION 14: Transport information 14.1. UN number Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR. 14.2. UN proper shipping name Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR. 14.3. Transport hazard class(es) Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR. 14.4. Packaging group Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR. 14.5.
PAGE 13
MSDS-No.: 433439 V002.1 Pattex Mould Remover spray Page 13 of 13 SECTION 16: Other information The labelling of the product is indicated in Section 2. The full text of all abbreviations indicated by codes in this safety data sheet are as follows: H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H315 Causes skin irritation. H318 Causes serious eye damage. H319 Causes serious eye irritation. H400 Very toxic to aquatic life.