Safety data sheet

ManualsBrandsPATTEX ManualsAdhesivesStabilit Express Adhesive 30 g

Safety Data Sheet according to (EC) No 1907/2006 - ISO 11014-1

Page 1 of 7

sds no. : 43189

V001.12

Revision: 13.10.2009

printing date: 02.11.2010

Pattex Powerkleber Stabilit Express

1. Identification of the substance/preparation and of the company/undertaking

Trade name:

Pattex Powerkleber Stabilit Express, Harz

Intended use:

2-Component methyl methacrylate adhesive

Company name:

Henkel AG & Co. KGaA

Henkelstrasse 67

40589 Düsseldorf

Germany

Phone: +49 (211) 797 0

Fax-no.: +49 (211) 798 0

E-mail address of person responsible for Safety Data Sheet:

ua-productsafety.de@henkel.com

Emergency information:

The Henkel information service also provides an around-the-clock telephone service on phone no.+49-(0)211-797-3350 for

exceptional cases.

The product is notified at the 'Information Centers for Cases of Poisoning in Germany'. These centers provide information by

telephone day and night in poisoning cases. Central emergency phone number: ++49 (0) 30 19240

2. Hazards identification

The product is classified as hazardous within the meaning of the valid (EU) preparation directive.

F - Highly flammable

Xi - Irritant

R11 Highly flammable.

R36/37/38 Irritating to eyes, respiratory system and skin.

R43 May cause sensitisation by skin contact.

Persons suffering from allergic reactions to acrylates should avoid contact with the product.

Pregnant women should absolutely avoid breathe in and skin contact.

3. Composition / information on ingredients

General chemical description:

2-Component methyl methacrylate adhesive

Base substances of preparation:

Polyester

Polyether

Methylmethacrylate

Summary of content (13 pages)

PAGE 1
Safety Data Sheet according to (EC) No 1907/2006 - ISO 11014-1 Page 1 of 7 sds no. : 43189 V001.12 Pattex Powerkleber Stabilit Express Revision: 13.10.2009 printing date: 02.11.2010 1. Identification of the substance/preparation and of the company/undertaking Trade name: Pattex Powerkleber Stabilit Express, Harz Intended use: 2-Component methyl methacrylate adhesive Company name: Henkel AG & Co. KGaA Henkelstrasse 67 40589 Düsseldorf Germany Phone: Fax-no.
PAGE 2
MSDS-No.: 43189 V001.12 Pattex Powerkleber Stabilit Express Page 2 of 7 Declaration of ingredients according to (EC) No 1907/2006: Hazardous components CAS-No.
PAGE 3
MSDS-No.: 43189 V001.12 Pattex Powerkleber Stabilit Express Page 3 of 7 7. Handling and storage Handling: Ensure that workrooms are adequately ventilated. Avoid open flames and sources of ignition. Take measures to prevent the build-up of electrostatic charges. The product is not self-igniting. Storage: Store protected from heat influence. Keep container in a well ventilated place. Keep only in the original container. Do not store together with food or other consumables (coffee, tea, tobacco, etc.). 8.
PAGE 4
MSDS-No.: 43189 V001.12 Pattex Powerkleber Stabilit Express Page 4 of 7 General protection and hygiene measures: Avoid skin-contact. Do not breathe dust. Do not breath vapours. Do not eat, drink or smoke while working. Wash hands before work breaks and after finishing work. 9. Physical and chemical properties General characteristics: Appearance liquid highly viscous Red-brown ester-like Odor: Phys./chem.
PAGE 5
MSDS-No.: 43189 V001.12 Pattex Powerkleber Stabilit Express Page 5 of 7 12. Ecological information Persistence and degradability: Ultimate biodegradation: The total of the organic components contained in the product achieve > 60% BOD/COD or CO2 liberation, or > 70% DOC reduction in tests for ease of degradability - threshold values for 'readily degradable' (e.g. to OECD method 301). The product contains polymere components that are degradable to a large extent.
PAGE 6
MSDS-No.: 43189 V001.12 Pattex Powerkleber Stabilit Express EmS: Seawater pollutant: Proper shipping name: Page 6 of 7 F-E ,S-D ADHESIVES Air transport IATA: Class: Packaging group: Packaging instructions (passenger) Packaging instructions (cargo) UN no.: Label: Proper shipping name: 3 III 309 310 1133 3 Adhesives 15. Regulations - classification and identification Indication of danger: F - Highly flammable Xi - Irritant Contains Methyl methacrylate Risk phrases: R11 Highly flammable.
PAGE 7
MSDS-No.: 43189 V001.12 Pattex Powerkleber Stabilit Express Page 7 of 7 16. Other information The labelling of the product is indicated in Section 15. The full text of the R-phrases indicted by codes in this safety data sheet are as follows: R10 Flammable. R11 Highly flammable. R20 Harmful by inhalation. R25 Toxic if swallowed. R36 Irritating to eyes. R36/37/38 Irritating to eyes, respiratory system and skin. R37/38 Irritating to respiratory system and skin. R43 May cause sensitisation by skin contact.
PAGE 8
Safety Data Sheet according to (EC) No 1907/2006 - ISO 11014-1 Page 1 of 6 sds no. : 43189 V001.12 Pattex Powerkleber Stabilit Express Revision: 13.10.2009 printing date: 02.11.2010 1. Identification of the substance/preparation and of the company/undertaking Trade name: Pattex Powerkleber Stabilit Express, Härter Intended use: 2-Component methyl methacrylate adhesive Company name: Henkel AG & Co. KGaA Henkelstrasse 67 40589 Düsseldorf Germany Phone: Fax-no.
PAGE 9
MSDS-No.: 43188 V001.12 Pattex Powerkleber Stabilit Express Page 2 of 6 Declaration of ingredients according to (EC) No 1907/2006: Hazardous components CAS-No. Dibenzoyl peroxide 94-36-0 EINECS content Classification 202-327-6 15 - 25 % E - Explosive; R3 O - Oxidizing; R7 Xi - Irritant; R36, R43 For full text of the R-Phrases indicated by codes see section 16 'Other Information'. Substances without classification may have community workplace exposure limits available. 4.
PAGE 10
MSDS-No.: 43188 V001.12 Pattex Powerkleber Stabilit Express Page 3 of 6 Handling: Avoid naked flames, sparking and sources of ignition. No smoking. The product is not self-igniting. Storage: Store in a cool place in closed original container. Store in a cool place, max. storage temperature 30°C. Do not store together with flammable substances/solutions. Do not store together with food or other consumables (coffee, tea, tobacco, etc.). 8.
PAGE 11
MSDS-No.: 43188 V001.12 Pattex Powerkleber Stabilit Express 9. Physical and chemical properties General characteristics: Appearance Powder fine White Odorless Odor: Phys./chem. properties: Bulk density Solubility (qualitative) (20 °C (68 °F); Solvent: Water) 450 - 550 g/l Insoluble 10. Stability and reactivity Conditions to avoid: Temperatures over appr. 65 °C Materials to avoid: Strong oxidizing agents. Reducing agents.
PAGE 12
MSDS-No.: 43188 V001.12 Pattex Powerkleber Stabilit Express Page 5 of 6 13. Disposal considerations Product disposal: Dispose of waste and residues in accordance with local authority requirements. After curing with component A : Small amounts of cured or dried product residues can be disposed of as household waste or as industrial waste similar to household waste. The valid EEC waste code numbers are not product-related but are largely source-related. These can be requested from the manufacturer.
PAGE 13
MSDS-No.: 43188 V001.12 Pattex Powerkleber Stabilit Express Page 6 of 6 BG regulations, rules, infos: Storage class VCI: Observe the German BG-Chemie data sheet: M023 - Polyesters and epoxy resins BG regulation: BGV B 1 Handling hazardous substances 5.2 16. Other information The labelling of the product is indicated in Section 15.