- Patton Electronics Server User Manual

ManualsBrandsPatton electronic ManualsServer2977

4 • Driver installation and configuration Model 2977 DialFire RAS User Guide

50 Driver installation for the Microsoft Windows NT operating system

2. Choose Users > Permission from the menu.

3. Conﬁgure permission. Use Microsoft Windows NT online help for information.

Conﬁguring Dial-up Networking Connections

Use this procedure to conﬁgure Dial-up Networking connections for a Patton Electronics adapter.

Procedure

1. To access the Dial-up Networking utility, double-click My Computer and then Dial-up Networking.

2. Choose

New.

3. Fill out conﬁguration ﬁelds. Here are a few tips:

– If you will use more than one telephone number to make the connection, do the following: (a) Fill in

the telephone number (b) Choose the

Alternate button, (c) Add numbers. (d) Choose OK when you are

done.

– In the

Dial-up using ﬁeld, specify the device that will be used for the connection.

– If you want to conﬁgure a Multilink connection, do the following: (1) Choose

Multiple Lines in the Dial-up

using

ﬁeld. This entry will appear only if you have conﬁgured the connection in RAS for Multilink. (2)

Choose

Conﬁgure. (3) Check any channels that are to be part of the multilink connection.

– When providing telephone numbers, remember the following: (a) You may have to include the number

9 or some other digit to get an outside line if your site uses a PBX or Centrex service. (b) For ISDN con-

nections, do not use spaces, dashes, or commas in the telephone number. (c) If this is a long distance

call, be sure the telephone number includes the number 1 and an area code.

– When selecting ISDN Devices, select the line type ordered from your service provider.

4. Choose

OK > Close.

Conﬁguring Modems on COM Ports

Use this procedure to conﬁgure a Patton Electronics modem as a Microsoft Windows NT COM port.

Procedure

1. Choose Control Panel > Modems > Add.

2. Check

Don't detect my modem; I will select it from a list and then choose Next.

3. Choose the Patton Electronics modem and then

Next.

4. Choose COM ports on which to install the modem and then

Next > Finish.

Uninstalling the Driver

Use this procedure to uninstall a Microsoft Windows NT driver.

Procedure

1. Open the Windows NT Control Panel.

2. Choose

Network > Adapters.

3. Highlight the adapter and choose

Remove.