- Patton VoIP Gateway Router Quick Start Guide

ManualsBrandsPatton electronic ManualsNetwork Router4110 Series

SmartNode 4520 and 4110 Series

VoIP Gateway Routers

Quick Start Guide

Approval

—Models that are equipped with FXO interfaces have been

approved for connection to the public telecommunication network.

Zulassung

—Modelle, die mit FXO Schnittstellen ausgerüstet sind, sind

für Anschaltung an das öffentliche Telekommunikationsnetz genehmigt.

Approvazione

—I modelli che sono dotato con le interfacce di FXO

sono stato approvato per collegamento alla rete di

telecomunicazion pubblica.

Aprobación

—Los modelos que se equipan los interfaces de FXO se han

aprobado para la conexión a la red de telecomunicación pública.

Approbation

—Des modéles qui sont équipés des interfaces de FXO ont

été approuvés pour le raccordement au réseau de télécommunication public.

Document Number: 13202U7-001 Rev. C

Part Number: 07MSN4000-QS

Revised: March 27, 2006

Sales Ofﬁce: +1 (301) 975-1000

Technical Support: +1 (301) 975-1007

E-mail: support@patton.com

WWW: www.patton.com

Summary of content (12 pages)

PAGE 1
SmartNode 4520 and 4110 Series VoIP Gateway Routers Quick Start Guide Approval—Models that are equipped with FXO interfaces have been approved for connection to the public telecommunication network. Zulassung—Modelle, die mit FXO Schnittstellen ausgerüstet sind, sind für Anschaltung an das öffentliche Telekommunikationsnetz genehmigt. Approvazione—I modelli che sono dotato con le interfacce di FXO sono stato approvato per collegamento alla rete di telecomunicazion pubblica.
PAGE 2
WARNING • The SmartNode contains no user serviceable parts. The equipment shall be returned to Patton Electronics for repairs, or repaired by qualified service personnel. • Mains Voltage: Do not open the case when the power cord is connected. For systems without a power switch, line voltages are present within the power supply when the power cord is connected.
PAGE 3
2.0 Connect the SmartNode to your PC Note For factory default IP address information, see Appendix A.0 on page 8. Option 1: Connect to a network that has a DHCP server (SN4520 & SN4110). Using the included black Ethernet cable, connect the SmartNode RJ-45 Ethernet WAN port, labeled ETH0/0 (see figure 1), to an Ethernet hub or switch on the same network as your PC. WAN interface ETH0/0 is configured as DHCP client.
PAGE 4
2. Right-click on My Network Places and select Properties in the context menu (see figure 3). Figure 3. Displaying the Network Connections window Figure 4. Displaying the Internet Properties (TCP/IP) Properties window 3. Double-click on Local Area Connection and click on Properties to open the Internet Protocol (TCP/IP) Properties window (see figure 4). 4. Select Obtain an IP address automatically and Obtain DNS server address automatically options. 5.
PAGE 5
Option 3: Connect the SmartNode console port to your PC (SN4520 & SN4110). If your PC has an RS-232 serial COM port, you may use it to connect the SmartNode Console port. Refer to the SmartNode 4110/4520 Getting Started Guide located on the CD-ROM shipped with your SmartNode for the procedure. 3.0 Start the SmartNode Discovery Tool 1. Insert the CD included with your SmartNode into the CD drive on your PC. 2. Copy the file named SNDiscovery.exe from the CD to your PC. 3.
PAGE 6
4.0 Access the Command Line Interface 1. In the Discovery Tool window, select the IP address of your SmartNode. 2. Right-click the selected line, and select Telnet. 3. In the telnet window, enter the username administrator. At the password prompt simply press the enter key. The SmartNode will respond by displaying its IP address as the command line prompt. 4. After you log in your SmartNode will be running in operator execution mode (indicated by > character in the command line prompt).
PAGE 7
5.0 Download a configuration example, adapt it to your network, and load it onto the SmartNode Patton provides a collection of configuration templates on the CD-ROM shipped with your SmartNode device—and also on the support page at www.patton.com/voip/appnotes.shtml. In most cases, one of these templates should be similar to your application so that you can use it to speed up configuring the SmartNode. Simply download to your PC the configuration note that most closely matches your application.
PAGE 8
6.0 Additional Information Refer to the SmartNode Series SmartWare Software Configuration Guide and the SmartNode Getting Started Guide located on the CD-ROM shipped with your SmartNode device and available online at www.patton.com/manuals. For detailed information about: • Installing, configuring, operating, and troubleshooting. • Warranty, trademark & compliance The CD-ROM also includes many freeware and shareware tools, including TFTP servers, and Telnet clients. A.
PAGE 9
C.0 Compliance Information C.1 Compliance EMC Compliance: • FCC Part 15, Class A • EN55022, Class A • EN55024 Safety Compliance: • UL60950-1/CSA C22.2 No. 60950-1 • IEC 60950-1 • EN60950-1 • AS/NZS 60950-1 PSTN Regulatory Compliance: • FCC Part 68 • CS-03 • TBR-21 • AS/ACIF S002 • AS/ACIF S003 C.
PAGE 10
C.3 FCC Part 68 (ACTA) statement (FXO ports) This equipment complies with Part 68 of the FCC rules and the requirements adopted by ACTA. On the bottom side of this equipment is a label that contains— among other information—a product identifier in the format US:AAEQ##TXXXX. If requested, this number must be provided to the telephone company.
PAGE 11
ment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the ground connections of the power utility, telephone lines and internal metallic water pipe system, are connected together. This protection may be particularly important in rural areas. C.5 EC Declaration of Conformity (See section C.7 “EG-Konformitätserklärung” for German version.
PAGE 12
Die unterzeichnete Konformitätserklärung kann heruntergeladen werden von: www.patton.com/certifications/. C.8 Zulassung Der SmartNode ist für die Anschaltung an das öffentliche Telekommunikationsnetz zugelassen. Er darf durch jedermann an eine FXO Schnittstelle angeschlossen und in Betrieb genommen werden. Copyright statement Copyright © 2005–2006, Patton Electronics Company. All rights reserved. The information in this document is subject to change without notice.