USER MANUAL MODEL 503S Serial Surge Protector Part# 07M503S-D Doc# 074201UD Revised 9/10/97 CERTIFIED An ISO-9001 Certified Company SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www.patton.
1.0 WARRANTY INFORMATION 1.3 SERVICE Patton Electronics warrants all Model 503S components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized modification. If this product fails or does not perform as warranted, your sole recourse shall be repair or replacement as described above.
2.0 GENERAL INFORMATION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Year parts and labor. If any questions arise during installation or use of the unit, contact Patton Electronics Technical Support at (301)975-1000. 2.1 PRODUCT DESCRIPTION 3.0 INSTALLATION Patton's Model 503S is simple to install, and requires no user configuration. Follow these installation steps. 1.
APPENDIX A Dear Valued Customer, PATTON MODEL 503S SPECIFICATIONS Thank you for purchasing Patton Electronics products! We do appreciate your business. I trust that you find this user manual helpful. LInes Protected: Protects 24 lines on the DB-25 serial interface Power Handling: Peak combined power handling up to 36kW; 1.5kW per wire; 10 x 1000µSec in Compliance to IEC 801-5, Level 3, 2 kV Clamp Voltage: 27 Volts Grounding: Surge energy diverted to chassis ground through pin 1 and metal D-shell.