- Patton Electronics IP Phone User Manual
Table Of Contents
- Summary Table of Contents
- Table of Contents
- List of Figures
- List of Tables
- About this guide
- Chapter 1 System overview
- Chapter 2 Configuration concepts
- Chapter 3 Command line interface (CLI)
- Chapter 4 Accessing the CLI
- Introduction
- Accessing the SmartWare CLI task list
- Accessing via the console port
- Using an alternate TCP listening port for the Telnet server
- Disabling the Telnet server
- Logging on
- Selecting a secure password
- Password encryption
- Opening a secure configuration session over SSH
- Displaying the CLI version
- Displaying account information
- Switching to another account
- Checking identity and connected users
- Command index numbers
- Ending a Telnet or console port session
- Showing command default values
- Chapter 5 System image handling
- Chapter 6 Configuration file handling
- Introduction
- Factory configuration
- Configuration file handling task list
- Copying configurations within the local memory
- Replacing the startup configuration with a configuration from Flashmemory
- Copying configurations to and from a remote storage location
- Replacing the startup configuration with a configuration downloaded from TFTPserver
- Displaying configuration file information
- Modifying the running configuration at the CLI
- Modifying the running configuration offline
- Deleting a specified configuration
- Encrypted file download
- Chapter 7 Basic system management
- Introduction
- Basic system management configuration task list
- Managing feature license keys
- Setting system information
- Setting the system banner
- Setting time and date
- Display clock information
- Display time since last restart
- Configuring the Web server
- Determining and defining the active CLI version
- Restarting the system
- Displaying the system logs
- Displaying reports
- Controlling command execution
- Timed execution of CLI command
- Displaying the checksum of a configuration
- Configuration of terminal sessions
- Chapter 8 RADIUS Client Configuration
- Chapter 9 IP context overview
- Chapter 10 IP interface configuration
- Introduction
- IP interface configuration task list
- Creating an IP interface
- Deleting an IP interface
- Setting the IP address and netmask
- Configuring a NAPT DMZ interface
- ICMP message processing
- ICMP redirect messages
- Router advertisement broadcast message
- Defining the MTU and MSS of the interface
- Configuring an interface as a point-to-point link
- Displaying IP interface information
- Displaying dynamic ARP entries
- Flushing dynamic ARP entries
- Processing gratuitous ARP requests
- Testing connections with the ping command
- IP link supervision
- Debug ARP
- Traceroute
- Configuring the IGMP Proxy
- Chapter 11 NAT/NAPT configuration
- Chapter 12 Ethernet port configuration
- Introduction
- Ethernet port configuration task list
- Entering the Ethernet port configuration mode
- Configuring medium for an Ethernet port
- Configuring Ethernet encapsulation type for an Ethernet port
- Binding an Ethernet port to an IP interface
- Multiple IP addresses on Ethernet ports
- Configuring a VLAN
- Configuring layer 2 CoS to service-class mapping for an Ethernet port
- Closing an Ethernet port
- Using the built-in Ethernet sniffer
- Chapter 13 Link scheduler configuration
- Introduction
- Quick references
- Link scheduler configuration task list
- Defining the access control list profile
- Creating a service policy profile
- Specifying the handling of traffic-classes
- Defining fair queuing weight
- Defining the bit-rate
- Defining absolute priority
- Defining the maximum queue length
- Specifying the type-of-service (TOS) field
- Specifying the precedence field
- Specifying differentiated services codepoint (DSCP) marking
- Specifying layer 2 marking
- Defining random early detection
- Discarding Excess Load
- Quality of Service for routed RTP streams
- Devoting the service policy profile to an interface
- Displaying link arbitration status
- Displaying link scheduling profile information
- Enable statistics gathering
- Chapter 14 Serial port configuration
- Chapter 15 Frame Relay configuration
- Introduction
- Frame Relay configuration task list
- Configuring Frame Relay encapsulation
- Configuring the LMI type
- Configuring the keep-alive interval
- Enabling fragmentation
- Entering Frame Relay PVC configuration mode
- Configuring the PVC encapsulation type
- Binding the Frame Relay PVC to IP interface
- Enabling a Frame Relay PVC
- Disabling a Frame Relay PVC
- Debugging Frame Relay
- Displaying Frame Relay information
- Integrated service access
- Example 1: Frame Relay on e1t1 without a channel-group
- Chapter 16 PRI port configuration
- Introduction
- PRI port configuration task list
- Enable/Disable PRI port
- Configuring PRI port-type
- Configuring PRI clock-mode
- Configuring PRI line-code
- Configuring PRI framing
- Configuring PRI line-build-out (E1T1 in T1 mode only)
- Configuring PRI used-connector (E1T1 in E1 mode only)
- Configuring PRI application mode (E1T1 only)
- Configuring PRI LOS threshold (E1T1 only)
- Configuring PRI Loopback detection (E1T1 only)
- Configuring PRI encapsulation
- Create a Channel-Group
- Configuring Channel-Group Timeslots
- Configuring Channel-Group Encapsulation
- Entering HDLC Configuration Mode
- Configuring HDLC CRC-Type
- Configuring HDLC Encapsulation
- PRI Debugging
- PRI Configuration Examples
- Chapter 17 BRI port configuration
- Introduction
- BRI port configuration task list
- Enable/Disable BRI port
- Configuring BRI clock-mode
- Configuring BRI Power-Feed
- Configuring BRI encapsulation
- Creating a channel group
- Configuring channel-group timeslots
- Configuring channel-group encapsulation
- Entering HDLC configuration mode
- Configuring HDLC encapsulation
- BRI Debugging
- BRI Configuration Examples
- Chapter 18 ISDN Overview
- Chapter 19 ISDN configuration
- Chapter 20 RBS configuration
- Chapter 21 DSL Port Configuration
- Chapter 22 Basic IP routing configuration
- Chapter 23 RIP configuration
- Introduction
- Routing protocol
- RIP configuration task list
- Enabling send RIP
- Enabling an interface to receive RIP
- Specifying the send RIP version
- Specifying the receive RIP version
- Enabling RIP learning
- Enabling an interface to receive RIP
- Enabling RIP announcing
- Enabling RIP auto summarization
- Specifying the default route metric
- Enabling RIP split-horizon processing
- Enabling the poison reverse algorithm
- Enabling holding down aged routes
- Setting the RIP route expiry
- Displaying RIP configuration of an IP interface
- Displaying global RIP information
- Chapter 24 Access control list configuration
- Introduction
- About access control lists
- Access control list configuration task list
- Mapping out the goals of the access control list
- Creating an access control list profile and enter configuration mode
- Adding a filter rule to the current access control list profile
- Adding an ICMP filter rule to the current access control list profile
- Adding a TCP, UDP or SCTP filter rule to the current access control list profile
- Binding and unbinding an access control list profile to an IP interface
- Displaying an access control list profile
- Debugging an access control list profile
- Examples
- Chapter 25 SNMP configuration
- Introduction
- Simple Network Management Protocol (SNMP)
- Identification of a SmartNode via SNMP
- SNMP tools
- SNMP configuration task list
- Setting basic system information
- Setting access community information
- Setting allowed host information
- Specifying the default SNMP trap target
- Displaying SNMP related information
- Using the AdventNet SNMP utilities
- Standard SNMP version 1 traps
- SNMP interface traps
- Chapter 26 SNTP client configuration
- Introduction
- SNTP client configuration task list
- Selecting SNTP time servers
- Defining SNTP client operating mode
- Defining SNTP local UDP port
- Enabling and disabling the SNTP client
- Defining SNTP client poll interval
- Defining SNTP client constant offset to GMT
- Defining the SNTP client anycast address
- Enabling and disabling local clock offset compensation
- Showing SNTP client related information
- Debugging SNTP client operation
- Recommended public SNTP time servers
- Chapter 27 DHCP configuration
- Introduction
- DHCP-client configuration tasks
- DHCP-server configuration tasks
- Chapter 28 DNS configuration
- Chapter 29 DynDNS configuration
- Chapter 30 PPP configuration
- Introduction
- PPP configuration task list
- Creating an IP interface for PPP
- Disable interface IP address auto-configuration from PPP
- Creating a PPP subscriber
- Trigger forced reconnect of PPP sessions using a timer
- Disable interface IP address auto-configuration from PPP
- Configuring a PPPoE session
- Configuring PPP over a HDLC Link
- Creating a PPP profile
- Configuring the local and remote PPP MRRU
- Displaying PPP configuration information
- Debugging PPP
- Sample configurations
- PPP Dial-up over ISDN
- Chapter 31 CS context overview
- Introduction
- CS context configuration task list
- Planning the CS configuration
- Configuring general CS settings
- Configuring call routing
- Creating and configuring CS interfaces
- Configuring dial tones
- Configuring voice over IP parameters
- Configuring ISDN ports
- Configuring FXS ports
- Configuring an H.323 VoIP connection
- Configuring a SIP VoIP connection
- Activating CS context configuration
- Chapter 32 VPN configuration
- Introduction
- VPN configuration task list
- Key management (IKE)
- Main differences between manual & IKE IPSEC configurations
- Creating an ISAKMP transform profile
- Creating an ISAKMP IPSEC policy profile
- Creating/modifying an outgoing ACL profile for IPSEC
- Configuration of an IP interface and the IP router for IPSEC
- Policy matching
- Sample configuration snippet
- Troubleshooting
- Encrypted Voice - Performance considerations
- Enabling RTP encryption support
- Using an alternate source IP address for specific destinations
- Sample configurations
- Chapter 33 CS interface configuration
- Chapter 34 ISDN interface configuration
- Introduction
- ISDN interface configuration task list
- Configuring DTMF dialing (optional)
- Configuring an alternate PSTN profile (optional)
- Configuring ringback tone on ISDN user-side interfaces
- Configuring call waiting (optional)
- Disabling call-waiting on ISDN DSS1 network interfaces
- Configuring Call-Hold on ISDN interfaces
- Enabling Display Information Elements on ISDN Ports
- Configuring date/time publishing to terminals (optional)
- Sending the connected party number (COLP) (optional)
- Enabling sending of date and time on ISDN DSS1 network interfaces
- Defining the ‘network-type’ in ISDN interfaces
- ISDN Explicit Call Transfer support (& SIP REFER Transmission)
- ISDN Advice of Charge support
- ISDN DivertingLegInformation2 Facility
- T1 Caller-Name Support
- Chapter 35 FXS interface configuration
- Introduction
- FXS interface configuration task list
- FXS supplementary services description
- Chapter 36 FXO interface configuration
- Introduction
- FXO services description
- Creating an FXO interface
- Deleting an FXO interface
- FXO interface configuration task list
- FXO off-hook on caller ID
- Configuring an alternate PSTN profile (optional)
- Configuring when the digits are dialed (optional)
- Configuring the number of rings to wait before answering the call (optional)
- Configuring how to detect a call has disconnected (optional)
- Configuring how to detect an outgoing call is connected (optional)
- Configuring the destination of the call
- FXO Mute dialing
- FXO interface examples
- Chapter 37 RBS interface configuration
- Chapter 38 H.323 interface configuration
- Introduction
- H.323 interface configuration task list
- Binding the interface to an H.323 gateway
- Configuring an alternate VoIP profile (optional)
- Configuring CLIP/CLIR support (optional)
- Enabling ‘early-proceeding’ on H.323 interfaces
- Enabling the early call connect (optional)
- Enabling the early call disconnect (optional)
- Enabling the via address support (optional)
- Override the default destination call signaling port (Optional)
- Configuring status inquiry settings (optional)
- AOC-D Support for H.323
- Chapter 39 SIP interface configuration
- Introduction
- SIP interface configuration task list
- Binding the interface to a SIP gateway
- Configure a remote host
- Configuring a local host (Optional)
- Using an alternate VoIP profile (Optional)
- Using an alternate SIP profile (Optional)
- Using an alternate Tone-Set profile (Optional)
- Configuring early call connect / disconnect (Optional)
- Configuring address translation (Optional)
- SIP REFER Transmission (& ISDN Explicit Call Transfer support)
- AOC Over SIP (Optional)
- Enabling the session timer (Optional)
- Enabling the SIP penalty-box feature (Optional)
- Initiating a new SIP session for redirected SIP calls (Optional)
- Configure the SIP hold method (Optional)
- Chapter 40 Call router configuration
- Introduction
- Call router configuration task list
- Map out the goals for the call router
- Enable advanced call routing on circuit interfaces
- Configure general call router behavior
- Configure number prefix for ISDN number types
- Configure call routing tables
- Called party number routing table
- Number type routing table
- Numbering plan routing table
- Name routing table
- IP address routing table
- URI routing table
- Presentation Indicator Routing Table
- Screening Indicator Routing Table
- Information transfer capability routing table
- Call-router support for redirecting number and redirect reason
- Time of day routing table
- Day of Week Routing Table
- Date routing table
- Deleting routing tables
- Configure mapping tables
- E.164 to E.164 Mapping Tables
- Custom SIP URIs from called-/calling-e164 properties
- Other mapping tables
- Deleting mapping tables
- Creating complex functions
- Deleting complex functions
- Digit collection & sending-complete behavior
- Creating call services
- Creating a hunt group service
- Creating a distribution group service
- Distribution-Group Min-Concurrent setting
- Call-router ‘limiter’ service
- Priority service
- CS Bridge service—‘VoIP Leased Line’
- Configuring the service second-dialtone
- Deleting call services
- Activate the call router configuration
- Test the call router configuration
- Configure partial rerouting
- Chapter 41 SIP call-router services
- Chapter 42 Tone configuration
- Chapter 43 FXS port configuration
- Chapter 44 FXO port configuration
- Chapter 45 H.323 gateway configuration
- Introduction
- Gateway configuration task list
- Binding the gateway to an IP interface
- Enable the gateway
- Configure registration authentication service (RAS) (Optional)
- Configure H.235 Security (optional)
- H.235 configuration
- Advanced configuration options (optional)
- Enabling H.245 Tunneling
- Enabling the fastconnect procedure
- Enabling the early H.245 procedure
- Changing the TCP port for inbound call-signaling connections
- Configuring the traffic class for H.323 signaling
- Setting the response timeout
- Setting the connect timeout
- Configuring the terminal type for registration with the gatekeeper
- Troubleshooting
- Chapter 46 Context SIP gateway overview
- Introduction
- Context SIP Gateway configuration task list
- Troubleshooting
- Configuration Examples
- Applications
- Outbound Authentication
- Inbound Authentication
- Outbound Registration
- Inbound Registration
- B2B User Agent with Registered Clients
- a. If the call has a destination-uri set the host part of that uri is taken as requested domain.
- b. If there is no destination-uri set, but a destination-ip-address, this is taken as requested d...
- c. If there is no destination-uri and no destination-ip-address set, but a location-service bound...
- a. If the call has a destination-uri set the user part of that uri is taken as requested user.
- b. If there is no destination-uri set, the destination-e164 is taken as requested user.
- Chapter 47 VoIP profile configuration
- Introduction
- VoIP profile configuration task list
- Creating a VoIP profile
- Configure codecs
- Configuring the transparent-clearmode codec
- Configuring the Cisco versions of the G.726 codecs
- Configuring DTMF relay
- Configuring RTP payload types
- Configuring RTP payload type for transparent-clearmode
- Configuring RTP payload types for the g726-32k and g726-32k-cisco coders
- Configuring RTP payload type for Cisco NSE
- Configuring Cisco NSE for Fax
- Configuring the dejitter buffer (advanced)
- Enabling/disabling filters (advanced)
- Configuring Fax transmission
- T.38 CED retransmission
- T.38 No-Signal Retransmission
- Fax bypass method
- Configuring fax failover
- Configuring modem transmission
- Modem bypass method
- Configuring the traffic class for Voice and Fax data
- Configuring IP-IP codec negotiation
- Examples
- Chapter 48 PSTN profile configuration
- Chapter 49 SIP profile configuration
- Chapter 50 Authentication Service
- Chapter 51 Location Service
- Introduction
- Location Service configuration task list
- Configuration Examples
- Chapter 52 VoIP debugging
- Appendix A Terms and definitions
- Appendix B Mode summary
- Appendix C Command summary
- Appendix D Internetworking terms & acronyms
- Appendix E Used IP ports & available voice codecs
Activating CS context configuration 351
SmartWare Software Configuration Guide 31 • CS context overview
02:14:30 CR > Updating tables in 3 seconds...
02:14:33 CR > [switch] Reloading tables now
02:14:33 CR > [switch] Flushing all tables
02:14:33 CR > [switch] Loading table 'TAB-ISDN-SERVICE'
02:14:33 CR > [switch] Loading table 'TAB-DEST-A'
02:14:33 CR > [switch] Loading table 'CAC-APPLE'
02:14:33 CR > [switch] Loading table 'CAC-ORANGE'
02:14:33 CR > [switch] Loading table 'CLI-MELON'
02:14:33 CR > [switch] Loading table 'MAP-CAC-APPLE'
02:14:33 CR > [switch] Loading table 'MAP-CAC-ORANGE'
02:14:33 CR > [switch] Loading table 'MAP-CLI-MELON'
02:14:33 CR > [switch] Loading table 'IF-LOCAL-BA-precall-service'
02:14:33 CR > [switch] Loading table 'IF-PBX-A-precall-service'
02:14:33 CR > [switch] Loading table 'IF-NODE-B-precall-service'
02:14:33 CR > [switch] Loading table 'IF-NODE-C-precall-service'
node(ctx-cs)[switch]#
Example: Configure SmartNode in an Enterprise Network
Situation: Figure 50 shows an enterprise network with a SmartNode configured with a BRI port. A PBX, a
LAN, the PSTN, and the company network are connected. The VoIP protocol used is H.323. There is no gate-
keeper, so direct call signaling is used. The voice codec used is G.723, so the DTMF relay is enabled. Because
no special dial tones have to be specified, the default tone-set profile is used.
Figure 50. SmartNode in an Enterprise network
Call routing is specified as follows:
• Calls from office C with number 1xx to office A with a fallback to PSTN
• Calls from office C with number 2xx to office B with a fallback to PSTN
• All other calls from office C to PSTN
Node
Company
Backbone
PSTN
PBX
Office A
Office B
Office C
147.86.130.1
147.86.130.24
147.86.130.11
User
2/3
User
2/2
Net
2/1
Net
2/0
clock distribution