User Guide

Maintenance 61
Model 2960/2996 RAS User Manual 5 • Troubleshooting and maintenance
5. Type superuser as the default username and password, then press <RETURN>. The Top Level Man-
agement window displays (see figure 44).
Figure 44. VT-100 Top Level Management window
6. Select option g Ethernet.
7. Select a PrimaryIpAddress to set the Ethernet IP address.
8. Type the IP address at the > prompt, then press <RETURN>.
9. Use the left arrow key to return to the previous menu.
10. Select b PrimaryIpMask to set the Ethernet IP subnet mask.
11. Type the IP netmask at the > prompt, then press <RETURN>.
12. Use the left arrow key to return to the top level management page.
13. Select a Home.
14. Select 1 StoreConfig to save your IP address and netmask. The RAS is now prepared for configuration using
a Web browser.
15. To import a saved configuration, connect your Web browser to the Administration Pages, then click on
Import/Export under the Configuration Menu to display the Import/Export main window (see figure 37 on
page 55).
16. To import a configuration file into the RAS, type the complete path and filename for the configuration file
you wish to load or click on the
Browse… button to select the desired file, then click on the Submit Query
button (see
figure 37 on page 55).
Upon successfully importing the file, the access server will display Configuration Load Complete, indicating
that the new operating parameters have been loaded into flash memory.
17. Click on HOME under the Configuration Menu, then click on the Hard Reset button under Immediate
Actions.