- Patton Electronics 2Base-TL Ethernet First Mile G.SHDSL Modem Getting Started Guide

ManualsBrandsPatton electronic ManualsModemRocketLink 3202

RocketLink™ Model 3202

2Base-TL Ethernet First Mile

G.SHDSL Modem

Getting Started Guide

Sales Ofﬁce:

+1 (301) 975-1000

Technical Support:

+1 (301) 975-1007

E-mail:

support@patton.com

WWW:

www.patton.com

Part Number:

07M3202-GS, Rev. A

Revised:

December 14, 2009

Start Installation

For Quick

Summary of content (106 pages)

PAGE 1
For Quick Start Installation RocketLink™ Model 3202 2Base-TL Ethernet First Mile G.SHDSL Modem Getting Started Guide Sales Office: +1 (301) 975-1000 Technical Support: +1 (301) 975-1007 E-mail: support@patton.com WWW: www.patton.com Part Number: 07M3202-GS, Rev.
PAGE 2
Patton Electronics Company, Inc. 7622 Rickenbacker Drive Gaithersburg, MD 20879 USA Tel: +1 (301) 975-1000 Fax: +1 (301) 869-9293 Support: +1 (301) 975-1007 Web: www.patton.com E-mail: support@patton.com Trademark Statement The term RocketLink is a trademark of Patton Electronics Company. All other trademarks presented in this document are the property of their respective owners. Copyright © 2009, Patton Electronics Company. All rights reserved.
PAGE 3
Summary Table of Contents 1 General information...................................................................................................................................... 17 2 Applications overview.................................................................................................................................... 22 3 Hardware installation....................................................................................................................................
PAGE 4
Table of Contents Summary Table of Contents ........................................................................................................................... 3 Table of Contents ........................................................................................................................................... 4 List of Figures ................................................................................................................................................. 9 List of Tables ...
PAGE 5
Model 3202 Getting Started Guide Table of Contents Configuring the Model 3202.................................................................................................................................31 Web configuration requirements .....................................................................................................................31 Console configuration requirements ................................................................................................................
PAGE 6
Model 3202 Getting Started Guide Table of Contents Remote Management Hosts ......................................................................................................................58 SNMP Administration ....................................................................................................................................59 Community Pool ......................................................................................................................................
PAGE 7
Model 3202 Getting Started Guide Table of Contents Rate ................................................................................................................................................................82 MGMT ..........................................................................................................................................................83 DHCP ............................................................................................................................
PAGE 8
Model 3202 Getting Started Guide Table of Contents Compliance .........................................................................................................................................................100 EMC compliance: .........................................................................................................................................100 Radio and TV interference (FCC Part 15)...............................................................................................
PAGE 9
List of Figures 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 Model 3202 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Model 3202 front panel LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Model 3202 rear panel . . . . . . . . . . . .
PAGE 10
Model 3202 Getting Started Guide 48 49 50 51 52 53 54 Main screen for authorized users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Main menu for unauthorized users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Main screen for unauthorized users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 11
List of Tables 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 General conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Front panel LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Port descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 12
About this guide This guide describes the RocketLink™ Model 3202 hardware, installation and basic configuration.
PAGE 13
Model 3202 Getting Started Guide About this guide Precautions Notes, cautions, and warnings, which have the following meanings, are used throughout this guide to help you become aware of potential problems. Warnings are intended to prevent safety hazards that could result in personal injury. Cautions are intended to prevent situations that could result in property damage or impaired functioning. Note A note presents additional information or interesting sidelights.
PAGE 14
Model 3202 Getting Started Guide About this guide Safety when working with electricity WARNING WARNING WARNING WARNING The Model 3202 contains no user serviceable parts. The equipment shall be returned to Patton Electronics for repairs, or repaired by qualified service personnel. Opening the Model 3202 case will void the warranty. Mains Voltage: Do not open the case the when the power cord is attached. Line voltages are present within the power supply when the power cords are connected.
PAGE 15
Model 3202 Getting Started Guide About this guide printed circuit cards are improperly handled and can result in complete or intermittent failures. Always follow ESD prevention procedures when removing and replacing cards. CAUTION Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact. Connect the clip to an unpainted surface of the chassis frame to safely channel unwanted ESD voltages to ground.
PAGE 16
Model 3202 Getting Started Guide About this guide Typographical conventions used in this document This section describes the typographical conventions and terms used in this guide. General conventions The procedures described in this manual use the following text conventions: Table 1. General conventions Convention Garamond blue type Meaning Indicates a cross-reference hyperlink that points to a figure, graphic, table, or section heading. Clicking on the hyperlink jumps you to the reference.
PAGE 17
Chapter 1 General information Chapter contents Model 3202 overview ............................................................................................................................................18 Model 3202 front panel.........................................................................................................................................19 LED descriptions .........................................................................................................................
PAGE 18
Model 3202 Getting Started Guide 1 • General information Model 3202 overview The Patton RocketLink™ Model 3202 simplifies and provides cost effective network extension by utilizing pre-existing twisted pair infrastructure enables service providers to offer broadband or data backhaul services to businesses, governments, and various institutions over existing last-mile, copper infrastructure.
PAGE 19
Model 3202 Getting Started Guide 1 • General information Model 3202 front panel LED descriptions The front panel LEDs display the status of the power, system, Ethernet ports, and Line port. Figure 2 shows the front panel LED indicators and table 2 provides a description of the LED indicators’ behavior. 00 3M2odem M ™ F k in L E eGtL.SH DS k oc R 4 3 2 L IN K C K /A L IN 0M 10 T 1 WA LA N N G D IA AL PW M R 1 2 4 3 WAN LINK RocketLink™ 3200 G.
PAGE 20
Model 3202 Getting Started Guide 1 • General information Model 3202 rear panel Port descriptions The RocketLink™ Model 3202 rear panel ports are shown in figure 3 and described in table 3. DC 9V CO NS OL E RS T LA N 1 2 3 MG MT 4 LIN E DC 9V LAN MGMT CONSOLE LINE RST + - 1 Power 2 3 Reset button Console RS-232 port 4 Management RJ-45 port LAN (1-4) RJ-45 port Ground DSL RJ-45 port Figure 3. Model 3202 rear panel Table 3.
PAGE 21
Model 3202 Getting Started Guide 1 • General information Reset button • To restart the unit with the current startup configuration—Press for less than 1 second and release the Reset button. The Model 3202 will restart with the current startup configuration. • To restart the unit with factory default configuration—Press the Reset button for 5 seconds until the Power LED starts blinking. The unit will restart with factory default configuration.
PAGE 22
Chapter 2 Applications overview Chapter contents Introduction ..........................................................................................................................................................23 Typical application ................................................................................................................................................23 Distance charts ............................................................................................................
PAGE 23
Model 3202 Getting Started Guide 2 • Applications overview Introduction The Model 3202 is Ethernet First Mile (EFM) compliant. EFM—also called pure Ethernet—lowers OPEX and CAPEX by resolving one of the biggest deficiencies in carrier networks, the lack of interworking arrangements among different protocols such as Frame Relay, TDM, ATM, and of course DSL. Using EFM allows for more efficient and trouble-free networking environments.
PAGE 24
Model 3202 Getting Started Guide 2 • Applications overview Distance charts Distance Chart 3200 Series (Per Wire Pair) Table 4. Distance Chart 3202 Series (Per Wire Pair) DSL Line Rate 26 AWG/0.4mm 24 AWG/0.5mm 22 AWG/0.65mm N kbps kft km kft km kft km 3 4 8 12 192 256 512 768 21.5 19.5 17.5 16.5 6.6 5.9 5.3 5 27.2 24.7 22.1 20.9 8.3 7.5 6.7 6.4 34.8 31.5 28.3 26.7 10.6 9.6 8.6 8.1 16 20 24 32 36 60 72 89 1024 1280 1536 2048 2304 3840 4608 5696 16 15 14.5 13.5 13 10 9.5 8.5 4.9 4.
PAGE 25
Model 3202 Getting Started Guide 2 • Applications overview Distance Chart Model 3202/8W (8 Wire/4 Pair) Table 6. Distance Chart Model 3202/8W (8 Wire/4 Pair) DSL Line Rate 26 AWG/0.4mm 24 AWG/0.5mm 22 AWG/0.65mm N kbps kft km kft km kft km 12 16 32 48 64 80 96 128 144 240 288 356 768 1024 2048 3072 4096 5120 6144 8192 9216 15360 18432 22784 21.5 19.5 17.5 16.5 16 15 14.5 13.5 13 10 9.5 8.5 6.6 5.9 5.3 5 4.9 4.6 4.4 4.1 4 3 2.9 2.6 27.2 24.7 22.1 20.9 20.2 19 18.3 17.1 16.4 12.6 12 10.8 8.
PAGE 26
Chapter 3 Hardware installation Chapter contents Introduction ..........................................................................................................................................................27 Planning the installation ........................................................................................................................................27 Network diagram ..............................................................................................................
PAGE 27
Model 3202 Getting Started Guide 3 • Hardware installation Introduction This chapter contains information for planning the installation of the Model 3202 with the following installation procedures: • “Unpacking the Model 3202” on page 29 lists the contents of the shipping box • “Connecting cables” on page 29 describes how to install the port cables • “Grounding the Model 3202 and connecting power” on page 30 describes how to ground and connect the power source Planning the installation Before beginning t
PAGE 28
Model 3202 Getting Started Guide 3 • Hardware installation Network diagram Draw a network overview diagram that displays all neighboring IP nodes, connected elements and telephony components. Figure 5 shows possible network connections to the Model 3202. Printer WAP Notebook RAID Drive Server Desktop PC Switch Desktop PC Notebook DC 9V LAN MGMT CONSOLE LINE RST + - LAN Desktop PC Laptop computer Figure 5.
PAGE 29
Model 3202 Getting Started Guide Note 3 • Hardware installation When setting up your Model 3202 you must consider cable-length limitations and potential electromagnetic interference (EMI) as defined by the applicable local and international regulations. Ensure that your site is properly prepared before beginning installation. Location and mounting requirements The Model 3202 is intended to be placed on a desktop or similar sturdy, flat surface that offers easy access to the cables.
PAGE 30
Model 3202 Getting Started Guide 3 • Hardware installation Grounding the Model 3202 and connecting power In connecting to the power source, it is important to establish a good grounding connection first, then the power connection. Do the following: 1. Assemble a ground wire using #10 AWG wire with green-colored insulation and two ring terminals.
PAGE 31
Model 3202 Getting Started Guide 3 • Hardware installation Configuring the Model 3202 There are three different ways you can configure the Model 3202: the serial console, Telnet, or a web browser. Web configuration requirements Make sure that the PC you use for configuration has an Ethernet adapter and TCP/IP installed. The Model 3202 provides a browser interface that allows you to configure and manage the modem.
PAGE 32
Chapter 4 Web configuration Chapter contents Introduction ..........................................................................................................................................................34 Setting Up the WMI .............................................................................................................................................34 TCP/IP setup .......................................................................................................................
PAGE 33
Model 3202 Getting Started Guide 4 • Web configuration SNMP Administration ....................................................................................................................................59 Community Pool ......................................................................................................................................60 Trap Host Pool .....................................................................................................................................
PAGE 34
Model 3202 Getting Started Guide 4 • Web configuration Introduction The Model 3202 provides a browser interface that allows you to configure and manage the modem. Make sure that the PC you use for configuration has an Ethernet adapter and TCP/IP installed. After you set up the IP address for the 3202, you can access the modem's Web interface applications directly in your browser by entering the IP address. You can then use your Web browser to manage and configure the unit from a PC.
PAGE 35
Model 3202 Getting Started Guide 4 • Web configuration Basic Configuration Options This section contains information for setting up the operation mode and MGMT port IP, DHCP server, and LAN via the WMI. Figure 8 shows a flowchart demonstrating basic setup via the WMI for the Model 3202. Figure 8. Basic setup flowchart Operation mode and MGMT port To configure the operation mode and MGMT port in the WMI: 1. From the main menu, click Basic to display the basic installation page. Figure 9.
PAGE 36
Model 3202 Getting Started Guide 4 • Web configuration 2. For Operation Mode, select the radio button for CPE (Customer Premises Equipment) or CO (Central Office). When the unit is connecting with an EFM DSLAM, select CPE as the operation mode. When using a “LAN to LAN” connection, one side must be set as CO and the other side must be set as CPE. 3. Enter information for the MGMT port. The Model 3202 requires an IP address to be managed over the network. The factory default IP address is 192.168.1.1.
PAGE 37
Model 3202 Getting Started Guide 4 • Web configuration 5. Click Next to commit your changes and continue to the LAN page (see “LAN” on page 37). Figure 10. Basic DHCP setup LAN To configure LAN settings through the WMI: 1. Click on Basic from the main menu. Set up the Operation Mode and MGMT port, then click Next. Set up the DHCP Server, then click Next to reach the LAN page. Figure 11. LAN setup page 2. Choose an option for the LAN Type.
PAGE 38
Model 3202 Getting Started Guide 4 • Web configuration 3. If you select Static IP as the LAN Type, enter details in the Static IP section. The default values for Static IP are: – IP Address: 192.168.2.1 – Subnet Mask: 255.255.255.0 – Gateway: 0.0.0.0 – DNS Server 1: 168.95.1.1 – DNS Server 2: 168.95.192.1 4. Click Next to commit your changes and continue to the Review page (see “Review and save basic setup changes” on page 38). Review and save basic setup changes 1.
PAGE 39
Model 3202 Getting Started Guide 4 • Web configuration Advanced Configuration Options This section contains information for setting up advanced options for the Model 3202 via the WMI. Advanced setup contains Model 3202 EFM, VLAN, QoS and Rate Control parameters. Note The advanced functions are only for advanced users to setup advanced functions. The incorrect advanced settings will affect the performance of the Model 3202 or cause system errors and isconnection.
PAGE 40
Model 3202 Getting Started Guide 4 • Web configuration TCPAM Type TCPAM (Trellis Coded Pulse Amplitude Modulation) is the standard used for line coding. Select the TCPAM type from the drop-down list. Auto is the default option for TCPAM. You can also manually set the TCPAM type. Main Rate Select the DSL rate for your model from the Main Rate drop-down list. The main rate is the multiple of 64kbps, 128kbps, or 256kpbs- depending on your model type.
PAGE 41
Model 3202 Getting Started Guide 4 • Web configuration VLAN Click on VLAN under Advanced on the main menu to reach the VLAN advanced configuration page. Figure 14. VLAN page VLAN (Virtual Local Area Network) allows a physical network to be partitioned into multiple logical networks. Devices on a logical network belong to one group. A device can belong to more than one group. With VLAN, a device cannot directly talk to or hear from devices that are not in the same group.
PAGE 42
Model 3202 Getting Started Guide 4 • Web configuration VID 20 WAN5 WAN4 VID 10 VID 30 WAN3 WAN6 WAN2 WAN7 WAN1 WAN8 Backbone 1 WAN 2 3 4 LINK LINK/ACT PWR ALM DIAG LAN 100M RocketLink™ 3200 G.SHDSL EFM Modem RocketLink Model 3202 EFM G.SHDSL Modem LAN2 LAN1 LAN3 VID 10 VID 20 LAN4 VID 30 Figure 15.
PAGE 43
Model 3202 Getting Started Guide 4 • Web configuration 802.1Q Tag-Based VLAN Click on VLAN under Advanced on the main menu to reach the VLAN advanced configuration page. Then, select the radio button for 802.1Q Tag-Based VLAN to display the configuration options. Figure 16. 802.1Q Tag-Based VLAN page • VID (Virtual LAN ID): A number to identify the VLAN segment. Select from 1 to 4094. • PVID (Port VID): An untagged member of the default VLAN. Select from 1 to 4094.
PAGE 44
Model 3202 Getting Started Guide 4 • Web configuration • Tag Protocol Identifier (TPID) is a defined value of 8100 in hex. When a frame has the EtherType equal to 8100, this frame carries the tag IEEE 802.1Q / 802.1P. • User Priority defines the priority level for different classes of traffic. There are 8 possible priority levels, with 0 being the lowest priority level and 7 being the highest level. IEEE 802.1P defines the operation for these 3 user priority bits.
PAGE 45
Model 3202 Getting Started Guide 4 • Web configuration ually or dynamically using Generic VLAN Routing Protocol (GVRP). However, if you want a port on this Model 3202 to participate in one or more VLANs, but none of the intermediate network devices nor the host at the other end of the connection supports VLANs, then you should add this port to the VLAN as an untagged port.
PAGE 46
Model 3202 Getting Started Guide 4 • Web configuration Port-Based VLAN Click on VLAN under Advanced on the main menu to reach the VLAN advanced configuration page. Then, select the radio button for Port-Based VLAN to display the configuration options. Figure 19. Port-Based VLAN page Port-Based VLANs are VLANs where the packet forwarding decision is based on the destination MAC address and its associated port.
PAGE 47
Model 3202 Getting Started Guide 4 • Web configuration Port-Based QinQ Click on VLAN under Advanced on the main menu to reach the VLAN advanced configuration page. Then, select the radio button for Port-Based QinQ to display the configuration options. Figure 20. Port-Based QinQ VLAN page • PVID (Port VID): An untagged member of the default VLAN. Select from 1 to 4094. • TPID (Tag Protocol Identifier): Enter 33024 for IEEE802.1Q . • Link Type: Select from Access or Trunk.
PAGE 48
Model 3202 Getting Started Guide 4 • Web configuration Table 9. Reserved Protocol Values Protocol Type Value ARP PUP RARP IP IPv6 PPPoE MPLS IPX/SPX IS-IS LACP 802.1x Cluster Reserved 0x0806 0x0200 0x8035 0x0800 0x86DD 0x8863/0x8864 0x8847/0x8848 0x8137 0x8000 0x8809 0x888E 0x88A7 0xFFFD/0xFFFE/0xFFFF Quality of Service (QoS) Quality of Service (QoS) refers to both a network's ability to deliver data with minimum delay, and the networking methods used to control the use of bandwidth.
PAGE 49
Model 3202 Getting Started Guide 4 • Web configuration Port Based Priority Click on QoS under Advanced on the main menu to reach the QoS advanced configuration page. Then, select the radio button for Port Based Priority to display the configuration options. Figure 23. QoS - Port Based Priority page In the Port Based Priority table, select the ports that the port-based priority rule should be applied. There six ports to choose from: LAN1, LAN2, LAN3, LAN4, DSL and Sniffing.
PAGE 50
Model 3202 Getting Started Guide 4 • Web configuration VLAN Tag Priority Click on QoS under Advanced on the main menu to reach the QoS advanced configuration page. Then, select the radio button for VLAN Tag Priority to display the configuration options. Figure 24. QoS - VLAN Tag Priority page VLAN Tag Priority uses the tag field information which has been inserted into an Ethernet frame. If a port has an 802.
PAGE 51
Model 3202 Getting Started Guide 4 • Web configuration Table 10. VLAN Tag Priority Levels Priority Level Traffic Type 0 (default) 1 2 3 4 5 6 7 Best Effort Background Spare Excellent Effort Controlled Load Video, less than 100 milliseconds latency and jitter Voice, less than 10 milliseconds latency and jitter Network Control In the Scheduling Configuration table, you can set up the type of QoS operation from 1 to 3. You can also set up the Queue Weight from 1 to 15.
PAGE 52
Model 3202 Getting Started Guide 4 • Web configuration 4,5 1,2 Queue 02 4,5 0,3 Queue 12 4,5 Queue 2 6,7 Queue 3 Figure 26. Service by WRR IP DSCP Priority Differentiated Services Overview. Differentiated Services (DiffServ) is a class of service (CoS) model that enhances best-effort Internet services by differentiating traffic by users, service requirements and other criteria.
PAGE 53
Model 3202 Getting Started Guide 4 • Web configuration Table 12.
PAGE 54
Model 3202 Getting Started Guide 4 • Web configuration Configuring DSCP Options. Click on QoS under Advanced on the main menu to reach the QoS advanced configuration page. Then, select the radio button for IP DSCP Priority to display the configuration options. Figure 28.
PAGE 55
Model 3202 Getting Started Guide 4 • Web configuration Rate Control Click on Rate Control under Advanced on the main menu to reach the Rate Control configuration page. Figure 29. Rate Control page Limiting bandwidth to specific users and ports helps control network congestion, ensure high performance, create efficient networks, and prevent a small number of users from monopolizing network bandwidth. Rate control can be used to intelligently manage bandwidth allocation in the networking.
PAGE 56
Model 3202 Getting Started Guide 4 • Web configuration Status Options This section contains information for monitoring status options for the Model 3202 via the WMI. The Status menu contains LINE, MGMT, and LAN parameters. LINE Status The LINE Status includes information for the run-time device status, mode, Bitrate and Performance information such as SNR margin, atteunation and CRC error count. Figure 31.
PAGE 57
Model 3202 Getting Started Guide 4 • Web configuration LAN Status The LAN Status page displays information about a LAN port. The system will allow you to select which LAN port to view. Figure 33. LAN Status page Administration Options This section allows you to conifugre administration options for Security and Simple Network Management Protocol (SNMP). Security Administration For system security, you should change the default user name and password during initial setup.
PAGE 58
Model 3202 Getting Started Guide 4 • Web configuration User Profiles For better security, change the Supervisor ID and Supervisor Password for the Model 3202. If you don't set them, all users will be able to access the Model 3202 using the default Supervisor ID and Supervisor Password ,which is root. You can authorize five legal users to access the Model 3202 via telnet or console only. There are two UI modes, menu driven mode and command mode to configure the Model 3202.
PAGE 59
Model 3202 Getting Started Guide 4 • Web configuration A configuration of 0.0.0.0 will allow all hosts on Internet or LAN to access the Model 3202. If you leave the trusted host list completely blank, you will block all PCs on the WAN from accessing the Model 3202. On the other hand, only PCs in the LAN can access the Model 3202. If you type the exact IP address in the filed, only that host can access the Model 3202. Click Finish to commit your changes.
PAGE 60
Model 3202 Getting Started Guide 4 • Web configuration Community Pool An SNMP community is a group of devices and management stations running SNMP. It helps define where information is sent. The community name is used to identify the group. A SNMP device or agent may belong to more than one community. It will not request information from management stations that do not belong to one of its communities. Table 14.
PAGE 61
Model 3202 Getting Started Guide 4 • Web configuration Trap Host Pool In the table of current trap host pool, you can set up the trap host. SNMP trap is an informational message sent from an SNMP agent to a manager. It is a management station (SNMP application) that receives traps. If you don’t define a trap host pool, then no traps are issued. Click Modify to set up the trap host pool. Figure 39. Trap host pool configuration • Version: Select version for trap host.
PAGE 62
Model 3202 Getting Started Guide 4 • Web configuration You can check the MCSV, Software Version, Chipset, Firmware Version, Host Name and System Up Time. The System Up Time item let you know how long the Model 3202 has been running since powering up. Configuration Tool The configuration tool has three options: Load Factory Default, Restore Configuration, and Backup Configuration. Click Config Tool in the Utility menu. Figure 41.
PAGE 63
Model 3202 Getting Started Guide 4 • Web configuration Upgrade You can update the firmware of Model 3202 using the Upgrade function. Click Upgrade in the Utility menu. Figure 42. Upgrade page Type the path and file name of the Firmware file you wish to upload to the Model 3202 in text box. Or, you can also click Browse to locate the file. Click OK to begin the upgrade process. The system will reboot automatically after finishing. (Firmware upgrades will only take effect after the system reboots).
PAGE 64
Model 3202 Getting Started Guide 4 • Web configuration Restart To reboot the Model 3202, click Restart in the Utility menu, then click the Restart button. Figure 44. Restart page The following screen displays: Figure 45.
PAGE 65
Chapter 5 Console and Telnet configuration Chapter contents Introduction ..........................................................................................................................................................67 Log in to the console interface .........................................................................................................................67 Log in using Telnet ........................................................................................................
PAGE 66
Model 3202 Getting Started Guide 5 • Console and Telnet configuration Factory Default ...............................................................................................................................................85 Status Command Menu ........................................................................................................................................86 G.SHDSL Status ........................................................................................................
PAGE 67
Model 3202 Getting Started Guide 5 • Console and Telnet configuration Introduction This chapter provides information for configuring the Model 3202 by using the serial console with Telnet. Log in to the console interface The console port is a RJ-48C connector that provides a connection to a PC for monitoring and configuring the Model 3202.
PAGE 68
Model 3202 Getting Started Guide 5 • Console and Telnet configuration The Model 3202 uses a menu-driven interface for serial console and Telnet management. This interface displays all available commands for configuring the modem. The following figure shows an example of the menu-driven interface. In the menu, scroll up/down by pressing the I / K keys. Select one command by pressing the L key. Go back to a higher level of the menu by pressing the J key.
PAGE 69
Model 3202 Getting Started Guide 5 • Console and Telnet configuration Main Menu Tree The commands available in the main menu tree depend on if you have logged in using a supervisor password (authorized user) or not (unauthorized user). An authorized user can access all of the configuration commands in the subdirectories using the enable command. Unauthorized users cannot change any configurations but can view the status and information for the Model 3202.
PAGE 70
Model 3202 Getting Started Guide 5 • Console and Telnet configuration Figure 48. Main screen for authorized users Menu tree for unauthorized users Unauthorized users may access the following configuration commands for the Model 3202. Figure 49. Main menu for unauthorized users Figure 50.
PAGE 71
Model 3202 Getting Started Guide 5 • Console and Telnet configuration Enable Command Menu The enable command menu lists commands for setting up the Model 3202. Move the cursor “ >>” to enable and press Enter. Type the supervisor password, which is root. ---------------------------------------------------------------------Command: enable Message: Please input the following information.
PAGE 72
Model 3202 Getting Started Guide 5 • Console and Telnet configuration Setup Command Menu The setup command menu lists commands for initially configuring the Model 3202. Move the cursor “ >>” to setup in the main menu and press Enter. When you enter the setup command, the following menu displays: >> g.shdsl lan vlan qos rate mgmt dhcp dns_proxy hostname default Configure g.
PAGE 73
Model 3202 Getting Started Guide 5 • Console and Telnet configuration Mode There are two types of G.SHDSL mode: • STU-C: Central Office (CO) terminal • STU-R: Customer Premise Equipment (CPE) Link Select the line type for your model. Line type means how many wires you want to use on the DSL connection. For example, you can select 2-wire, 4-wire or 8-wire line type for the 8-wire model. Table 19.
PAGE 74
Model 3202 Getting Started Guide 5 • Console and Telnet configuration Line Probe For adaptive mode applications, set the Line Probe to Enable. The Model 3202 will adapt the data rate according to the line status. For all other applications, set the Line Probe to Disable. Clear Use the clear command to reset the CRC error count. LAN The lan command menu lists commands for setting up the LAN ports. Move the cursor “ >>” to lan in the setup menu and press Enter.
PAGE 75
Model 3202 Getting Started Guide 5 • Console and Telnet configuration VLAN Virtual LAN (VLAN) is defined as a group of devices on one or more LANs that are configured so that they can communicate as if they were attached to the same wire, when in fact they are located on a number of different LAN segments. Because VLAN is based on logical instead of physical connections, it is extremely flexible. You can setup the Virtual LAN (VLAN) parameters in VLAN command.
PAGE 76
Model 3202 Getting Started Guide 5 • Console and Telnet configuration 802.1Q VLAN. To modify the VLAN rule, move the cursor to modify and press Enter. ----------------------------------------------------------------------------Command: setup vlan modify <1~8> <0~4094> Message: Please input the following information.
PAGE 77
Model 3202 Getting Started Guide 5 • Console and Telnet configuration ----------------------------------------------------------------------------Command: setup vlan link_mode <1~6> Message: Please input the following information. Port index <1~6>: 1 Port link type (TAB Select) : ----------------------------------------------------------------------------- Table 23 shows the options available within the 802.
PAGE 78
Model 3202 Getting Started Guide 5 • Console and Telnet configuration QoS Quality of Service (QoS) refers to both a network's ability to deliver data with minimum delay, and the networking methods used to control the use of bandwidth. Without QoS, all traffic date is equally likely to be dropped when the network is congested. This can cause a reduction in network performance and mark the network inadequate for a time-critical application such as video-on-demand.
PAGE 79
Model 3202 Getting Started Guide 5 • Console and Telnet configuration Queue Weight This setting configures the weight value for each queue. ----------------------------------------------------------------------------Command: setup qos qweight <0~3> <1~15> Message: Please input the following information.
PAGE 80
Model 3202 Getting Started Guide 5 • Console and Telnet configuration • SP services queues based on priority only. As traffic comes into the Model 3202, traffic on the highest priority queue, Q3 is transmitted first. When that queue empties, traffic on the next highest-priority queue, Q2 transmitted until Q2 empties, and then traffic is transmitted on Q1 and so on. If higher priority queues never empty, then traffic on lower priority never gets sent.
PAGE 81
Model 3202 Getting Started Guide 5 • Console and Telnet configuration Table 29. VLAN Tag Priority Levels Priority Level Traffic Type 0 (default) 1 2 3 4 5 6 7 Best Effort Background Spare Excellent Effort Controlled Load Video, less than 100 milliseconds latency and jitter Voice, less than 10 milliseconds latency and jitter Network Control For example, you can set the Model 3202 to use Weighted Round-Robin (WRR) queuing (Type 1) that specifies a relative weight of each queue.
PAGE 82
Model 3202 Getting Started Guide 5 • Console and Telnet configuration Table 31. IP DSCP Priority QoS Options DSCP Queue Index DSCP Queue Index DSCP Queue Index DSCP Queue Index 0 16 32 48 1 17 33 49 2 18 34 50 3 19 35 51 4 20 36 52 5 21 37 53 6 22 38 54 7 23 39 55 8 24 40 56 9 25 41 57 10 26 42 58 11 27 43 59 12 28 44 60 13 29 45 61 14 30 46 62 15 31 47 63 List Use the list command to view the QoS settings. Rate The rate command menu lists commands for setting the port rate.
PAGE 83
Model 3202 Getting Started Guide 5 • Console and Telnet configuration MGMT The mgmt command menu lists commands for configuring the IP address and subnet mask for the MGMT port. Move the cursor “ >>” to mgmt in the setup menu and press Enter. The following menu displays: >> address MGMT IP address and subnet mask ---------------------------------------------------------------------Command: setup mgmt <1~1> Message: Please input the following information.
PAGE 84
Model 3202 Getting Started Guide 5 • Console and Telnet configuration DHCP Server The dhcp command menu lists commands for configuring DHCP settings. Move the cursor “ >>” to dhcp in the setup menu and press Enter. The following menu displays: >> generic fixed list DHCP server generic parameters DHCP server fixed host IP list Show DHCP configuration The generic command menu lists commands for configuring general DHCP settings. Move the cursor “ >>” to generic in the dhcp menu and press Enter.
PAGE 85
Model 3202 Getting Started Guide 5 • Console and Telnet configuration DNS Proxy The dns_proxy command allows you to set up three DNS servers for the Model 3202. Move the cursor “ >>” to dns_proxy in the setup menu and press Enter. ---------------------------------------------------------------------Command: setup dns_proxy [IP] [IP] Message: Please input the following information. DNS server 1 (ENTER for default) <168.95.1.1>: 10.0.10.1 DNS server 2: 10.10.10.
PAGE 86
Model 3202 Getting Started Guide 5 • Console and Telnet configuration Status Command Menu The status command menu lists commands for viewing the system status of interfaces on the Model 3202. Move the cursor “ >>” to status in the main menu and press Enter. When you enter the status command, the following menu displays: >> g.shdsl Show g.shdsl status interface Show interface statistics status Table 33. Status Command Menu Command Description g.shdsl The G.
PAGE 87
Model 3202 Getting Started Guide 5 • Console and Telnet configuration Show Command Menu The show command menu lists commands for viewing system and configuration information for the Model 3202. Move the cursor “ >>” to show in the main menu and press Enter. When you enter the show command, the following menu displays: >> system config script Show general information Show all configuration Show all configuration in command script Table 34.
PAGE 88
Model 3202 Getting Started Guide 5 • Console and Telnet configuration Reboot Command The reboot command restarts the Model 3202. Move the cursor “ >>” to reboot in the main menu and press Enter. ---------------------------------------------------------------------Command: reboot Message: Please input the following information. Do you want to reboot? (y/n): y ---------------------------------------------------------------------- Type “y” to begin the reboot process.
PAGE 89
Model 3202 Getting Started Guide 5 • Console and Telnet configuration Administration Command Menu The admin command menu lists commands for modifying user profiles, Telnet access, Simple Network Management Protocol (SNMP), and supervisor information (username and password). Move the cursor “ >>” to admin in the main menu and press Enter.
PAGE 90
Model 3202 Getting Started Guide 5 • Console and Telnet configuration There are two UI modes for setting up the Model 3202, command and menu mode. The menu mode uses a menu-driven interface. The command mode uses line commands. (Command mode is not covered in this manual). Move the cursor “ >>” to profile in the modify menu and press Enter.
PAGE 91
Model 3202 Getting Started Guide 5 • Console and Telnet configuration ----------------------------------------------------------------------------Command: admin security ip_pool modify <1~16> Message: Please input the following information. Client address pool entry number <1~16>: 1 Client IP address (ENTER for default) <0.0.0.0>: ----------------------------------------------------------------------------- You can configure up to sixteen entries for legal address pools.
PAGE 92
Model 3202 Getting Started Guide 5 • Console and Telnet configuration ----------------------------------------------------------------------------Command: ... 2 edit Message: Please input the following information.
PAGE 93
Model 3202 Getting Started Guide 5 • Console and Telnet configuration You can set up the following options: • Version: Set to Disable, Version 1 or Version 2. • Trap host IP address: Enter the dtrap host IP address. • Community: Enter the community password. Use the list command to view all SNMP trap host entries. Supervisor Password and ID The supervisor ID and password is the last option in the security command menu, but it is the most important menu item.
PAGE 94
Model 3202 Getting Started Guide 5 • Console and Telnet configuration Utility Command Menu Model 3202 has three utility tools embedded in the firmware: upgrade, backup and restore. You can update the new firmware via TFTP upgrade tools, backup the configuration via the TFTP backup tool and restore the configuration via the TFTP restore tool. To upgrade the firmware, you must have the new firmware file named *.bin that will be supported by supplier. Also, you must have your own TFTP server.
PAGE 95
Model 3202 Getting Started Guide 5 • Console and Telnet configuration Exit Command To log out of the system without saving your changes, move the cursor “ >>” to exit in the main menu and press Enter.
PAGE 96
Chapter 6 Contacting Patton for assistance Chapter contents Introduction ..........................................................................................................................................................97 Contact information..............................................................................................................................................97 Warranty Service and Returned Merchandise Authorizations (RMAs).....................................................
PAGE 97
Model 3202 Getting Started Guide 6 • Contacting Patton for assistance Introduction This chapter contains the following information: • “Contact information”—describes how to contact Patton technical support for assistance. • “Warranty Service and Returned Merchandise Authorizations (RMAs)”—contains information about the Model 3202 warranty and obtaining a return merchandise authorization (RMA). Contact information Patton Electronics offers a wide array of free technical services.
PAGE 98
Model 3202 Getting Started Guide 6 • Contacting Patton for assistance Out-of-warranty service Patton services what we sell, no matter how you acquired it, including malfunctioning products that are no longer under warranty. Our products have a flat fee for repairs. Units damaged by lightning or other catastrophes may require replacement.
PAGE 99
Appendix A Compliance information Chapter contents Compliance .........................................................................................................................................................100 EMC compliance: .........................................................................................................................................100 Radio and TV interference (FCC Part 15).................................................................................................
PAGE 100
Model 3202 Getting Started Guide A • Compliance information Compliance EMC compliance: • FCC Part 15, Class A • EN55022, Class A • EN55024 Radio and TV interference (FCC Part 15) This equipment generates and uses radio frequency energy, and if not installed and used properly—that is, in strict accordance with the manufacturer's instructions—may cause interference to radio and television reception.
PAGE 101
Appendix B Specifications Chapter contents G.SHDSL Connector..........................................................................................................................................102 G.SHDSL Specifications .....................................................................................................................................102 DSL Modulation .......................................................................................................................................
PAGE 102
Model 3202 Getting Started Guide B • Specifications G.SHDSL Connector Shielded RJ-45 G.SHDSL Specifications ITU-T G.991.2.(2004) 2Base-TL EFM Bonding (IEEE 802.3ah PAF) DSL Modulation TC-PAM 32 TC-PAM 16 Ethernet Connector 4 x 8-position shielded RJ-45 Auto-sensing 10/100Base-TX with half or full-duplex operation LAN Protocols 802.1d Transparent Bridging 2K MAC address learning bridge VLAN Support IEEE 802.
PAGE 103
Model 3202 Getting Started Guide B • Specifications Management Interface Web based GUI CLI for local and console access; password protected; SNMP v1/v2 (RFC 1157/1901/1905) agent and MIB (RFC 1213/1493) EFM OAM (IEEE 802.
PAGE 104
Appendix C Port pin-outs Chapter contents Introduction ........................................................................................................................................................105 Console port........................................................................................................................................................105 Ethernet ............................................................................................................................
PAGE 105
Model 3202 Getting Started Guide C • Port pin-outs Introduction This section provides pin-out information for the ports of the Model 3202. Console port Configuration settings: 9600 bps, 8 bits, no parity, 1 stop bit, no flow control 8–RTS (N/C) 7–CTS (N/C) 6–TD 5–RD 4–SG 3–DTR 2–CD (N/C) 1–DSR 1 2 3 4 5 6 7 8 Pins 1 & 3 are connected together Figure 54. EIA-561 (RJ-45 8-pin) port Note Introduction N/C means no internal electrical connection.
PAGE 106
Model 3202 Getting Started Guide C • Port pin-outs Ethernet Table 35. RJ45 socket 10/100Base-T Note Pin Signal 1 2 3 6 TX+ TXRX+ RX- Pins not listed are not used. Table 36.