SmartNode™ Model 1200, 1400 & 4552 VoIP Gateway Routers Quick Start Guide Document Number: 13211U7-001 Rev. A Part Number: 07MSWGUI-QS Revised: October 31, 2005 Sales Office: +1 (301) 975-1000 Technical Support: +1 (301) 975-1007 E-mail: support@patton.com WWW: www.patton.
• The SmartNode contains no user serviceable parts. The equipment shall be returned to Patton Electronics for repairs, or repaired by qualified service personnel. WARNING • Mains Voltage: Do not open the case when the power cord is connected. For systems without a power switch, line voltages are present within the power supply when the power cord is connected.
This guide will allow you to quickly access the configuration interface of a SmartNode and give an overview of the different elements you can or need to configure. For detailed information on all configuration parameters refer to the SmartWare software configuration guide. The SmartNode has a built in DHCP Server which allows an automatic IP connection with a connected PC. To prepare the connection you need to configure the PC to use DHCP. The following paragraphs show how to do this on Windows.
2. Double-click on Local Area Connection and click on Properties to open the Internet Protocol (TCP/IP) Properties window (see figure 2). 3. Select Obtain an IP address automatically and Obtain DNS server address automatically options. 4. Click OK to save changes and close the properties windows. 3.0 Connect the PC to the SmartNode LAN Port Now use the included Ethernet cable to connect the configured PC to the SmartNode.
2. The subsequent pop-up window asks you for the login credentials (see figure 5). The factory default login credentials are: User Name: administrator Password: There is no password, leave this field empty Figure 5. Login window 3. Click OK. 4.0 Get Started After successful login you get to the SmartNode home page, and you can configure your device.
The GUI consists of the following main elements (see figure 6): • The “Navigation Bar” on the left edge presents you with a menu listing giving access to the various configuration and status pages of the SmartNode. • At the top of the page you see the “Current System Path” which displays the location and element currently presented in the main area. • The rest of the page displays the configuration and status information for the different features of the SmartNode.
5.0 Access the Internet Connect an Ethernet cable from the WAN port on the SmartNode to the upstream WAN Internet connection. Begin the configuration for Internet access with the WAN page. Figure 7. WAN page 5.1 Connecting a PC and logging in Here are some special hints you may use when configuring your SmartNode: For each box containing an “Apply” button, fill in the required fields and press “apply” once. The settings are applied immediately after the button is pressed.
from a DHCP server. Use this option when connecting the SmartNode to a DSL router, a cable modem, or to a company LAN (with a DHCP server). This is the factory default configuration so no configuration is required, only the LAN and WAN Ethernet connections should be made to access the Internet immediately. • PPPoE. The SmartNode establishes the connection with the Internet using PPPoE.
The CD-ROM also includes many freeware and shareware tools, including TFTP servers, and Telnet clients. Besides the comprehensive manuals included on the CD-ROM a host of additional information is available on-line at www.patton.com/voip. Here you will find: • Configuration notes—This library contains example command sets for configuring and activating such SmartWare services as DHCP, QoS, VPNs, Frame-Relay, and many others.
A.0 Customer and Technical Support If you contact Patton support, you should have some system information ready to help us better help you. This information allows us to quickly identify what product you are using and how it is configured. Therefore, we integrated a “system report” page that collects all relevant information and presents it to you on one web page. Click on “Support” to access this page – the page also gives you instructions on where to send the report. Figure 8.
A.0 Appendix—Factory default IP addresses Factory default IP addresses and netmask configuration. WAN interface Ethernet 0 (0/0) LAN interface Ethernet 1 (0/1) DHCP server address range (LAN) IP Address DHCP Client 192.168.1.1 192.168.1.10-192.168.1.19 Network mask n/a 255.255.255.0 255.255.255.0 B.0 Compliance Information B.
B.3 EC Declaration of Conformity (See section B.5 “EG-Konformitätserklärung” for German version.
Copyright statement Copyright © 2005, Patton Electronics Company. All rights reserved. The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document. Trademarks statement The term SmartNode is a trademark of Patton Electronics Company. All other trademarks presented in this document are the property of their respective owners.
NOTES ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ _______________________
NOTES ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ _______________________
NOTES ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ _______________________
