Product Manual

Quick Spade Instruction
1) Adjust skid loader forks and slide both forks into the two u channel
brackets on the bottom side of the quick spade. (Opposite side of decal)
2) Using a 3/8 (2,000 lbs or more) Log Chain. Chain unit to the main
frame of forks or to face plate of quick attach. (Chain not included)
3) Using a standard (ratchet style) 3/8 load binder. Tighten chain to
prevent unit from sliding off the forks. (Binder not included)
4) All extra chain to be securely fastened to prevent injury or damage.
5) Always call for utility location before digging.
6) Read all Instructions of the power unit you are using in conjunction
with this Quick Spade.
7) Do not place excess load on spade tip.
8) Total load not to exceed power unit (skid steer, tractor, ECT)
maximum.
Quick Spade Instruction - Paumco Printable
http://www.paumco.com/print_quickspade.html
1 of 1
4/23/2012 9:22 AM