User Manual

Rev. H 1210

44527 pg 7

Step Eight

INSTALL WINDSHIELD HEADER

Orient the Windshield Header

on the vehicle. Lay the header

on top of the bows with the snap

studs facing up. Place the legs

of the header into the bracket

above the door opening on each

horizontal rod. Install the legs in

the brackets with a #10-15/16

Bolt and Lock Nut on each side.

Bracket

Windshield

Header

Front

#10-15/16

Bolt

Lock Nut

Bracket

Step Nine

INSTALL TOP TO HEADER

Pull the deck up over the center bow to the Windshield Header Assembly. Open the Sun Roof and stand

inside the vehicle to access the front of the assembly. Wrap the front edge of the Top Fabric around the

front edge of the Windshield Header Assembly. Make sure that the fabric is centered on the header. Press

the plastic retainer along the front of the top into the channel on the header until it snaps into the channel.

Note: Make sure the plastic retainer is snapped ﬁ rmly into the Header channel. The Sun Roof feature will

not work properly if the retainer is not securely installed.

Wrap Fabric around

Windshield Header and

snap plastic retainer into

channel in header