Owner's manual

44587 pg 6

Rev. H 1210

Step Eight

INSTALL WINDSHIELD HEADER

Orient the Windshield Header on the

vehicle. Lay the header on top of the

bows with the snap studs facing up.

Place the legs of the header into the

bracket above the door opening on

each horizontal rod. Install the legs in

the brackets with a #10-15/16 Bolt and

Lock Nut on each side.

Bracket

Windshield

Header

Front

#10-15/16

Bolt

Lock Nut

Bracket

Horizontal

Rod

Windshield

Bracket

Slide rod into bracket

until 2nd pin pops up

Horizontal Rod

Vertical Rod

Step Seven

INSTALL HORIZONTAL ROD

Slip the end of the Horizontal Rod into the tube on the Windshield Bracket. Push the

ﬁ rst Spring Button through the tube until the second Spring Button on the rod pops up

through the hole in the Windshield Bracket.

Step Six

INSTALL VERTICAL ROD

Place the bottom of the Vertical Rod into the hole

at the front of the Side Belt Rail.

Side Belt Rail

Vertical Rod

Place Vertical Rod

into hole

Front Bow

Rear

Bow