User Manual

14
NOTE: Disconnect the power connector from the battery connector before
conducting any maintenance procedures.
TOOLS REQUIRED: Phillips Screwdriver
(not included)
Flat Head Screwdriver
(not included)
HOW TO REPLACE THE BATTERY
1. Unscrew the screw on the seat with a screwdriver and remove the seat.
2. Use a screwdriver to remove the 4 screws from the battery cover.
3. Unplug the power connector (which is connected to the battery).
4. Remove the old battery by carefully lifting it out of the battery compartment.
5. Carefully place the new battery into the battery compartment.
6. Set wires in order before replacing and securing the battery cover with screws,
then plug the power connector into the battery connector.
DETAILED MAINTENANCE AND REPAIR
F
Battery
Connector
Power
Connector
2
3
1
Battery
Battery
Cover