User Manual

HOW TO REPLACE THE FOOT PEDAL

1. Disconnect the power connector from the battery connector as shown in the

diagram on page 8.

2. Gently turn the ride-on toy on the side, unscrew two screws from foot pedal

cover and disconnect the two wire terminals from the pedal switch as shown (see

Figure 1).

3. Hand squeeze the tabs under two sides of the pedal switch and push out to

release the foot pedal.

4. Replace a new foot pedal switch and snap back to the plastic body, tightly

reconnect the two wire terminals with the two pins on the foot pedal switch,

then replace the pedal switch cover back and tighten the cover with two screws

underneath the foot rest.

Pedal Switch

Socket

Wire Terminal

Pedal Switch

Pedal Switch Cover

3 42