Instructions / Assembly

The box should contain:
1- Molded Outdoor Plastic Table Top
1- Steel Table Brace
1- Vinyl Foot Cap with Hole for
Tri-Beam Hammock Stand
2- Vinyl Mini Leg Caps
Product Dimensions: 12"W x 18"L x 20"H
ASSEMBLY INSTRUCTIONS
1. Slide the vinyl foot cap onto the table brace until
the foot cap meets the mini legs on the table brace.
This is to be done by holding the cap at its base and
gently squeezing while moving the cap onto the table
brace. It is a snug fit for better support of the table brace.
Place the mini leg caps on the mini legs of the table brace.
See figure 1.
Tri-Beam
®
Hammock Table
Congratulations on your purchase of the Tri-Beam
®
Hammock Table.
We believe that you will find it a product of unsurpassed quality and durability.
If you have any questions regarding our products, call our
toll-free consumer customer service line: 800.643.3522
Visit our web page: www.thehammocksource.com
5046-A
D.OG
Tri-Beam
®
Hammock Stand
Foot Bracket
Foot
Cap
Table Top
Table
Support
Mini-Leg
Cap
Mini-Leg on
Table Support
2. Remove the foot cap from one of the Tri-Beam hammock stand foot brackets.
3. Slide the foot of the table support completely into the foot bracket
of the Tri-Beam hammock stand until the cap is
secured onto the foot bracket.
4. Place the table top onto the
steel table brace. Swivel the top to the desire
location for optimum lounging.
WARRANTY INFORMATION:
Products of The HammockSource are guaranteed to be free of defects in
workmanship and materials for up to one year after the purchase date.
Prolonged exposure to weather conditions including snow, rain, and
humidity are not covered under the warranty nor is damage caused by
normal wear, mildew, or improper care including storage, maintenance,
and installation. If an item is found to be defective within one year of its
purchase, it will be replaced without charge upon the return of the unit
accompanied by a sales receipt. If you choose to return an item, you
must contact our customer service department at 800.643.3522 to
obtain a Return Authorization Number that will allow us to track your unit
once it arrives at our warehouse; thereby creating a faster response to
your concern.
Figure 1.