User's Manual

Dimensions：162.5mm  82.5mm 56.5mm（L



H）

Weight：365g

5. Installation and Usage Tips

1)Do not damage electric wire and power adapter. If electric wire or power adapter is damaged ,

please do not use the terminal any more.

2) Before power adapter is plugged into power socket, please make sure that voltage which the

power socket supplies is appropriate working voltage for the terminal.

3)Do not expose the terminal in sunshine, or in humid, hot, or dusty environment

4)Keep the terminal away from liquid material

5) Do not plug any unknown material into any port of the terminal, since it may create serious

damage to the terminal.

6) If the terminal is defective, please contact professional POS repair technicians.

7) When installing paper roll, please be aware of the cutter within paper bracket.

8) Please use standard thermal paper, in order to protect the printer and avoid paper jam.

9) Do not assemble the terminal in explosion hazardous area.

6.Battery Usage Tips

1) Charge indoor by PAX charger, where is cool and well ventilated;

2) Do not apart the battery;

3) Do not short circuit the battery;

4) Keep the battery away from sunshine, smog and dust;

5) Do not squeeze, punch the battery, put it into liquid or near fire;

6) Keep way from environment which is too hot , too cold, damp and highly explosive;

7) Once a failure happens such as heating or distortion, or it was broken down. Please change new

battery;

8) Change new battery if it cannot satisfy your requirement;

9) Change new battery if using more than two years.

FCC Regulations:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiated radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

-Reorient or relocate the receiving antenna.