D900 User Manual D900 Mobile Payment Terminal PAX TECHNOLOGY LIMITED
D900 User Manual Product Description Figure 2: Front view 1. Receiver 2. LED indicator 3. Touch screen 4. Android function keys 5. USB connector 6. Pinpad function keys 7. Pinpad screen 8. Pinpad keys 9. Multi-function connector 10. Microphone 11.
D900 User Manual Figure 2: Back view 1. Magnetic stripe card reader 2. Speaker 3. Battery compartment cover 4. Barcode / Camera 5. Audio jack 6. POWER key 1. 2. 3. 4. 5. 6. 7. 8. 9.
D900 User Manual Figure 4: View from different angles 1) SAM Card Figure 5: Take off the battery compartment cover ①Take off the battery compartment cover. ②Insert SAM card into the slot. 2) Battery ①Remove the battery compartment cover. ②Install the battery. 3) MicroSD Card ①Take off the battery compartment cover. ②Insert MicroSD card into the slot.
D900 User Manual Instructions 1) Switch the device on / off Switch on: Press and hold the POWER button until the device vibrates. . Switch off: ①Press and hold the POWER button for a few seconds. ② When the menu appears, tap Power off. 2) Swipe magnetic stripe card Figure 6: Swipe magnetic stripe card When users swipe magnetic stripe card along the slot, the back of the card must be faced up as shown in Figure 6. Bi-directional swiping is supported.
D900 User Manual As shown in Figure 7: when tapping contactless card, please put the contactless card into the sensing area at the back cover of the terminal. 4) LED indicator The LED indicator show ① Solid blue when the system is starting. ② Solid red when the battery is being charged. ③ Solid green when the battery is fully charged.
D900 User Manual Installation and Usage Tips 1) Do not damage the power cord and the adapter. If the power cord or the adapter is damaged, please do not use it any more. 2) Before the adapter is plugged into the socket. Please make sure that its voltage is appropriate for the terminal. 3) Do not expose the terminal in sunshine, or in humid, hot, and dusty environmental conditions 4) Keep the terminal away from liquid materials.
FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
