User's Manual

5.1 Specification
WLAN Standard IEEE 802.11b/g/n, WiFi compliant
Host Interface SDIO
Dimension L x W x H: 12 x 12 x 1.5 (typical) mm
Frequency Range 2412-2462MHz
Modulation 802.11b : DQPSK, DBPSK, CCK
802.11g/n : OFDM /64-QAM,16-QAM, QPSK, BPSK
5.2 Voltages
Absolute Maximum Ratings
Symbol Description Min. Max. Unit
VBAT Input supply Voltage -0.5 6.5 V
VDDIO Digital/ SDIO Voltage -0.5 4.1 V
IMPORTANT NOTE:
This module has been granted as limited modular approval that is limited to that the specific host
only. The host manufacturer is responsible to follow the instruction hereafter for the FCC/ISEDC
compliance requirement of the end product. Under such configuration, the FCC/ISEDC radiation
exposure limits set forth for an population/uncontrolled environment can be satisfied.
The antenna is integrated into module, and the antenna type is monopole with antenna gain: -0.6
dBi.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm
separation with the antenna while this end product is installed and operated. The end user has to
be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment
can be satisfied. The end user has to also be informed that any changes or modifications not
expressly approved by the manufacturer could void the user's authority to operate this
equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19
statement is required to be available in the users manual: This device complies with Part 15 of
FCC rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate this equipment.