PAX TECHNOLOGY LIMITED reserves the right to change product technology specifications without notifying. “. PAX PAX TECHNOLOGY LIMITED Room 2416, 24/F., Sun Hung Kai Center, 30 Barbour Road, Hawaiian, Hong Kong Tel: +852-2588 8808 Fax: +852-2602 3300 E-mail: Website: www pax.com.
© Coax PAX TECHNOLOGY LIMITED Product overview Printer Cover Printer Cover .
© Coax PAX TECHNOLOGY LIMITED Installation 1) Place S800 on table. 2) Connect AC plug of power adapter into AC socket. 3) Connect the communication port: E.g. The base communication port is Modem Plug one end of JR-11 telephone line into the line port of the connection board and the other end into the telephone line outlet. E.g. The base communication port is Ethernet Plug one end of JR-45 Ethernet cable Into the LAN port of the connection board and the other end Into the standard LAN socket.
© Coax PAX TECHNOLOGY LIMITED magnetic stripe face the machine. Bi-directional pulling the magnetic card is acceptable. It is recommended from up to down, and with a steady speed. 3) IC card operational description When Insert a card, make the contact of the card upward. Gently Insert and withdrew the card In order to protect the contact on card and IC card connector. 4) Tear paper operation Hold the end of paper along with the paper cutter as an angle of 45 degree and swiftly and evenly tear the paper off.
Cox PAX TECHNOLOGY LIMITED Notice at Installation and Use 1) Use a power bar well grounded and with a fuse unit 2) Protect power supply cable and power adapter. If they are broken, they are no longer be used. 3) Before connect power bar to AC socket, make sure the voltage Is correct as POS states. 4) POS should be placed steady on table. It Is not allowed make It under sun beam, high temperature, high humidity or place full of dust. 5) Keep It away from liquid.
/ PAX TECHNOLOGY LIMITED Note: To protect the process of PIN-gantry, It Is not limited to the above methods and examples, merchants also can adopt other methods and steps to esp cardholder's PIN safe. ‘8800 Pin-antry observation corridors v.s. PIN protection methods Observation Corridors S00 in Cabstand Hera stand Note *Customer Instruction methods are less repeatable and therefore should be used In combination with other methods.
/ PAX TECHNOLOGY LIMITED The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice In order for you to make necessary modifications to maintain uninterrupted service. If trouble Is experienced with this equipment US:PAXMMOOBSS00, for repair or warranty Information, please contact PAX Technology Inc. 631247-9660.
/ PAX TECHNOLOGY LIMITED the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government, This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
