Installation Manual A77 Smart Mini Payment Terminal PAX TECHNOLOGY LIMITED
1.Contents Checklist Please check the components after unpacking. If any one of them is missing, or if thereis a page missing from the product manual,etc.,please contact the dealer. Name Qty. A77 Smart Mini Payment Terminal 1 AC Power Adapter 1 USB Cable 1 Battery 1 Product Manual 1 2. Installation TYPE_C port:Connect USB device or PC. TYPE-C SAM/SIM card: 1 Open the battery cover on the bottom of the terminal; ○ 2 Take out the battery; ○ 3 Insert SAM/SIM card into the corresponding SAM/SIM card slot.
SIM1/Micro SAM1/SAM2 3. Instruction 1）Power ON/OFF Power on: press and hold the Power button for five seconds until the LCD besides, and then the terminal is being turned on. Power off: press and hold the Power button for three seconds until the shutdown menu appears, tap Shutdown > Click Shutdown, and then “Shutting…” appears, the terminal is being turned off. 2）Magnetic Stripe Card Place the magnetic stripe face left, swipe card through the magnetic card slot at a constant speed.
. Installation and Usage Tips 1）Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty environment. 2）Forbid non-professional to repair the terminal. 3）Before insert the card, please check internal and around of IC card slot. when you found some suspicious objects , must reportto related administrator. 5. Lithium Ion Battery Usage Tips WARNING: 1）Don't use the battery in sunlight or smoke, dust environment.
FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
ISED Notice This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présentappareilestconforme aux CNR Innovation, Sciences etDéveloppementéconomique Canada applicables aux appareils radio exempts de licence.
