Product Manual

A910 Smart Mobile Payment Terminal
1. Contents Checklist
Please check the components after unpacking. If any one of them is missing, or if there is a page
missing from the product manual,etc.,please contact the dealer.
Name
Qty.
A910 Smart Mobile Payment Terminal
1
AC Power Adapter
1
Battery
1
Cable
1
Product Manual
1
2. Installation
USB port: Connect USB devices or PC.
SAM/SIM card:
○
1
Open the battery cover on the Top of the terminal;
○
2
Take out the battery;
○
3
Insert SAM/SIM card into the corresponding SAM/SIM card slot.
Micro SD card:
○
1
Open the battery cover on the Top of the terminal;
○
2
Take out battery;
○
3
Insert Micro SD card into the corresponding Micro SD card slot.
3. Instruction
1） Power ON/OFF
Power on: press and hold the Power button for five seconds until LCD backlight light, the terminal
turns on successfully.
Power off: press and hold the Power button for three seconds until the shutdown menu appears,
tap Shutdown > Click Shutdown, and then “Shutting…” appears, the terminal is being turned
off.
2） Magnetic Stripe Card
Place the magnetic stripe face left, swipe card through the magnetic card slot at a constant
speed, which could be bi-directionally.
3） IC card
Put IC card chip side upward and the magnetic stripe face down, then push-in Card slot of bottom.
4) Tearing off paper
Tear the printing paper toward the 45 degree direction of the paper culter.
5) Battery charging
User can charge the battery with power adapter, and the charging status will be displayed on the
LCD.
6）Swiping contactless cardg
Place a contactless card close to the sensor area of swiping which is at the top of the terminal.
Working Environment Temperature: 0℃～50℃(32℉～122℉)
Humidity: 10%～93%( non-condense)
Storage Environment Temperature:-20℃～70℃(-4℉～158℉)
Humidity.:5%～95% (non-condense)