Users Manual

PAX TECHNOLOGY INC.
9
10
PAX TECHNOLOGY INC.
Operating System: Android 7.1
CPU: Quad-Core Cortex A53, 1.8GHz
Memory: 1 GB RAM + 8GB Flash
Display: 6-inch, Resolution 720 x 1280 pixels, multi-touch
capacitive screen, supports stylus pen
Audio: Built-in speaker, supports headphone output
Specifications
Specifications
8
Device Location
9
Device Location
Cleaning the Device
10
Cleaning the Device
Locate the device on a counter top, desktop or table top. Keep
the device away from direct sunlight, excessive dust, moisture,
and heat. Avoid locating the device near electrical devices that
might introduce interference such as microwave ovens and blow
dryers.
WARNING:
Do not use industrial strength or abrasive cleaner as it may
damage or scratch the screen.
• Do not immerse tablet in water (or liquid).
• Do not spray water or cleaner into card reader or ports.
• To clean screen, apply distilled water or mild glass cleaner onto
a soft, lint-free cloth and gently wipe screen.
• To clean tablet, apply distilled water or plastic-safe cleaner onto
a soft, lint-free cloth and gently wipe tablet.
Installation and Usage TipsInstallation and Usage Tips
11
• Base functionality is not available while the device is connected
to a computer or when it is being charged using a Type C plug.
• Use the included USB cable with power adapter to charge the
device, otherwise the device may not operate normally.
• Avoid exposing the device to an excessively hot, humid, dusty,
or strong electromagnetic environment.
• Do not vibrate, shake, or drop the device.
• Do not insert or unplug any part of the device while it is powered
on. This may cause damage to an internal circuit.
• Please contact PAX technical support for assistance with the
device.
Caution: Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment. In a domestic environment,
this product may cause radio interference in which case the user
may be required to take adequate measures.
Privacy Shield
7
Privacy Shield
You have the option to install a high or low privacy shield on your tablet.
( See page 2, Front View for the location of the Privacy Shield Mounting Slots.)
1. To attach a high privacy shield, insert the hard plastic low
privacy shield into the bottom of the rubber high privacy shield.
(If you are using the low privacy shield, this step is not required.)
2. Align the four pegs on the privacy shield with the four mounting
slots around the keypad.
3. Press the privacy shield firmly to secure it into place.
Low privacy shield High privacy shield
Caution: If the privacy shield is not installed, you must use
PCI-approved alternative methods to secure the tablet keypad.
Camera:
Front camera, 2-megapixels with flash, fix focus,
high-speed code scanning
Light sensor: Main display automatically adjusts backlight
brightness
Wireless communication: Supports Wi-Fi, Bluetooth,
3G/4G (optional)
Positioning: Supports GPS, Compass, Galileo, GLONASS
Card slots:
SIM/SD 2-in-1 card slot
1 SAM card slots
Micro SD card slot (supports maximum of 128GB)
Magnetic stripe card/IC card slot, 2-in-1,
supports MAG&ICC
Magnetic card reader: Supports Track 1/2/3
IC card reader:Complies with ISO7816 standards, EMV2000 L1
& L2, PBOC3.0
Contactless card reader: Compatible with ISO 14443 Type A&B
Working Environment:
Operating temperature：0℃～50℃；
Relative humidity：5%～96% (Non-condensing)
Storage Environment:
Storage temperature：-20℃～70℃；
Relative humidity：5%～96% (Non-condensing)
Power Adapter: Input: 100‐240VAC, 50Hz/60Hz
Output: 5V/2A
Battery:
3.7V/1300mAh
FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This device has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiated radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
FCC RF Exposure Information (SAR)
This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set
by the Federal Communications Commission of the United States.
During SAR testing, this device is set to transmit at its highest
certified power level in all tested frequency bands, and placed in
positions that simulate RF exposure in usage near the body.
Although the SAR is determined at the highest certified power
level, the actual SAR level of the while operating can be well
below the maximum value. This is because the device is
designed to operate at multiple power levels so as to use only
the power required to reach the network. In general, the closer
you are to a wireless base station antenna, the lower the power
output.The exposure standard for wireless employs a unit of
measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg.
The FCC has granted an Equipment Authorization for this model
device with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on this
model device is on file with the FCC and can be found under the
Display Grant section of www.fcc.gov/oet/ea/fccid after searching
on
FCC ID: 93$5
While there may be differences between the SAR levels of
various devices and at various positions, they all meet the
government requirement.
ISED Notice
This device complies with Innovation, Science and Economic
Development Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présentappareilestconforme aux CNR Innovation, Sciences
et Développementéconomique Canada applicables aux appareils
radio exempts de licence. L'exploitationestautorisée aux deux
conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareildoit accepter tout
brouillageradioélectriquesubi, mêmesi le brouillageest susceptible
d'en
IC: $$5
ISED Radiation Exposure Statement
This EUT is in compliance with SAR for general
population/uncontrolled exposure limits in ISED RSS-102 and
had been tested in accordance with the measurement methods
and procedures specified in IEEE 1528 and IEC 62209. This
device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
Cetappareilestconforme aux limitesd'exposition DAS incontrôlée
pour la populationgénérale de la norme CNR-102 science de
l'innovation et le développementéconomique Canadaet a ététesté
en conformité avecles méthodes de mesure et
procéduresspécifiéesdans IEEE 1528 et IEC 62209.Cetappareil
et saousesantennes ne doiventpas êtreco-localisésoufonctionner
en conjonction avec tout autreantenneoutransmetteur.
RSS-247Chapter 6.4
The device could automatically discontinue transmission in case
of absence of information to transmit, or operational failure. Note
that this is not intended to prohibit transmission of control or
signaling information or the use of repetitive codes where required
by the technology.
the device for operation in the band 5150–5250 MHz is only for
indoor use to reduce the potential for harmful interference to
co-channel mobile satellite systems;
In addition, high-power radars are allocated as primary users
(i.e. priority users) of the bands 5250–5350 MHz and 5650–5850
MHz and that these radars could cause interference and/or
damage to LE-LAN devices.
L'appareilpeutinterrompreautomatiquement la transmission en
casd'absenced'information à transmettreoud'échecopérationnel.
Ilest à noterquecela ne vise pas à interdire la transmission de
données de contrôleou de signalisationoul'utilisation de codes
répétitifslorsque la technologiel'exige.
-le dispositif de fonctionnementdans la bande 5150 – 5250 MHz
n'estutiliséqu'àl'intérieur pour réduire les
risquesd'interférencesnuisibles pour les systèmes mobiles par
satellite à cocanal;
En outre, les radars de haute puissance sontattribués en
tantqu'utilisateursprincipaux (c.-à-d. utilisateursprioritaires) des
bandes 5250 – 5350 MHz et 5650 – 5850 MHz et queces radars
pourraient causer des interférences et/ouendommager les
dispositifs LAN-le.
11 12 13 14
PAX TECHNOLOGY INC.
ISED
IS
PAX TECHNOLOGY INC.