. Contents Checklist Please check the components after unpacking. If any are missing, please contact the dealer. Part Qty E700 1 AC Power Adapter 1 AC Power Cable 1 Thermal Paper Roll 1 Quick Setup Guide 1 2.
Ports View Cash Drawer Port,Power Port,Battery Cover,HDMI Port,Audio Jack,RS232 Port,USB-A/B Host Port,USB-OTG,LAN,Battery Cover Side View Volume+,Volume- 3.
USB B-HOST output: 5V 500mA USB C-HOST output: 5V 500mA USB D-HOST output: 5V 500mA Open the back cover to access following ports: SD Card Slot – Open card cover, remove battery and insert card into SD card slot SIM Card Slot – Open card cover, remove battery and insert SIM card into SIM slot to connect to cellular carrier’s network. 4. Power ON/OFF Power on: Press and hold the Power button for three seconds until the main screen displays normally.
Operation System: Android 7.1 CPU: Quad-core Cortex™-A63,1.8GHZ Memory: 2GB DDR+16GB eMMC Main Display: 12.5 inch, 1920x1080 resolution, capacitive touch screen Printer: 3" high-speed thermal printer with auto-cutter, printing speed 150mm/s, paper width 80mm, diameter 80mm Audio: Built-in speaker, support headphone output Camera with scan window: (coverage of 30mm-120mm) for 1D/2D scan Front fixed focus camera with 0.
2. Load the paper roll into the paper compartment and extend the end of the paper out of the printer. 3. Close printer cover. The Paper Out indicator light turns off. 8. Installation and Usage Tips • Avoid exposing the device to an excessively hot, humid, dusty, or strong electromagnetic environment. • Do not vibrate, shake, or drop the device. • Do not plug or unplug any part of the device while it is powered on. This may cause damage to an internal circuit.
Icon shows The mains plug is used as the disconnect device, The socket-outlet shall be installed near the equipment and shall be easily accessible. This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
PAX TECHNOLOGY LIMITED Manufacturer: PAX Computer Technology (Shenzhen) Co.,Ltd. Address:4/F, No.3 Building, Software Park, Second Central Science-Tech Road, High-Tech Industrial Park, Shenzhen, Guangdong, P.R.C. Tel: 0755-86169630 Fax: 0755-86169634 Website: http://www.pax.com.cn Responsible Party: PAX Technology, Inc. 8880 Freedom Crossing Trail, Building 400, 3rd Floor Suite 300, Jacksonville , Florida, 32256 Tony Fernandez tony.fernandez@pax.