. Contents Checklist Please check the components after unpacking. If any are missing, please contact the dealer. Name Qty. M50 Mobile Payment Terminal 1 AC Power Adapter (optional) 1 USB Cable 1 Mobile phone Card Pick-up Needle 1 Product Manual 1 2. Product Description Denoise MIC Rear-Camera Flash Light NFC Reading area 1.
Speaker Main-MIC Type-C Front Camera Receiver Proximity Seneor Touch Screen Volume + Volume Power Button SIM/microSD IC Card-Slot Card-Slot Fingerprint Audio-Jack TOP View 3. Installation TYPE_C port: Connect USB device or PC. TYPE-C SIM card: 1 Take the Card Pick-up Needle out of the box; ○ 2 Insert the Card Pick-up Needle into the SIM card slot; ○ 3 Insert SIM card into the pop-up card-slot.
Insert microSD card into the pop-up card-slot. ○ Nano SIM Nano SIM OR microSD 4. Instructions 1） Power ON/OFF Power on: press and hold the Power button for five seconds until the LCD besides, and then the terminal is being turned on. Power off: press and hold the Power button for three seconds until the shutdown menu appears, tap Shutdown > Click Shutdown, and then “Shutting…” appears, the terminal is being turned off.
3）Swiping contactless card Place a contactless card close to the sensor area of swiping which is at the back of the terminal. 5. Installation and Usage Tips 1）Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty environment.
2）Forbid non-professional to repair the terminal. 3）Before insert the card, please check internal and around of IC card slot. When you found some suspicious objects, must report to related administrator. Working Environment： Temperature: -10℃~50℃(32℉~122℉) R.H.:5%~96%(non-condense) Storage Environment： Temperature: -20℃~70℃(-4℉~158℉) R.H.:5%~95%(non-condense) 6. Lithium Ion Polymer Battery Usage Tips WARNING: 1）Don't use the terminal in sunlight or smoke, dust environment.
E-Label This device has E-Lable, Steps to access the e-label is Setting—About phone---Regulatory labels. FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
compromettre le fonctionnement. The user manual for LE-LAN devices shall contain instructions related to the restrictions mentioned in the above sections, namely that: i. the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; ii. where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p.
