Product Manual
Table Of Contents
- X3s Wireless Data Terminal
- Contents Checklist
- Product Description
- Installation
- 1. Unlock and Lock the Rear Cover
- 2. Install and Remove the Battery
- 3. Install SIM Card/PSAM Card /TF Card
- 4 Device Charging
- 5 Installation Diagram of Wrist Strap
- Instructions
- 1. Use of Two-dimensional Scanner (One-dimensional Optional)
- 2. Use of Contactless Card
- 3. PSAM Card
- Precautions for Installation and Use
- Precautions for Lithium Battery Usage
- /
- PAX TECHNOLOGY LIMITED
- Manufacturer: PAX Computer Technology (Shenzhen) Co.,Ltd.
- Address:4/F, No.3 Building, Software Park, Second Central Science-Tech Road, High-Tech Industrial Park, Shenzhen, Guangdong, P.R.C.
- Tel: 0755-86169630 Fax: 0755-86169634
- Website: http://www.pax.com.cn
- Responsible Party: PAX Technology, Inc.
- 8880 Freedom Crossing Trail, Building 400, 3rd Floor Suite 300, Jacksonville , Florida, 32256
and then take the cover off the terminal. As figure shown below.
Figure 1-1-1
2) To lock the rear cover: Put back the rear cover and make the 4 screws aligned
with the 4 holes, then tighten the screws to lock the cover. As the figure shown
below.
Figure 1-1-2
2. Install and Remove the Battery
1) To install battery: Put battery into the battery storehouse in the right direction as
shown below.
Figure 1-2-1