Product Manual
Table Of Contents
- X3s Wireless Data Terminal
- Contents Checklist
- Product Description
- Installation
- 1. Unlock and Lock the Rear Cover
- 2. Install and Remove the Battery
- 3. Install SIM Card/PSAM Card /TF Card
- 4 Device Charging
- 5 Installation Diagram of Wrist Strap
- Instructions
- 1. Use of Two-dimensional Scanner (One-dimensional Optional)
- 2. Use of Contactless Card
- 3. PSAM Card
- Precautions for Installation and Use
- Precautions for Lithium Battery Usage
- /
- PAX TECHNOLOGY LIMITED
- Manufacturer: PAX Computer Technology (Shenzhen) Co.,Ltd.
- Address:4/F, No.3 Building, Software Park, Second Central Science-Tech Road, High-Tech Industrial Park, Shenzhen, Guangdong, P.R.C.
- Tel: 0755-86169630 Fax: 0755-86169634
- Website: http://www.pax.com.cn
- Responsible Party: PAX Technology, Inc.
- 8880 Freedom Crossing Trail, Building 400, 3rd Floor Suite 300, Jacksonville , Florida, 32256
4 Device Charging
The device can be charged in two ways: Using Type-C port or base Pogo Pin
1) By Type-C port: Insert the USB cable into Type-C port for charging as shown
in the following figure.
Figure 1-4-1
2) By base Pogo Pin: Connect the Pogo Pin at the bottom of the terminal with
the Pogo Pin of the base for charging.
5 Installation Diagram of Wrist Strap
Figure 1-5-1