Product Manual

Instructions
1. Use of Two-dimensional Scanner (One-dimensional Optional)
The scanner is on the top of the device. When using it, enter the “Menu”，select
“DEMO”> two-dimensional (or one-dimensional) scan, align the scan window with
the barcode, slightly press the left/right scan button on the device or click "Scan" on
the interface, the scan window will emit the two-dimensional illumination region(or
one-dimensional light beam), cover the barcode with the lighting beam emitted by
the scanner, then the barcode will be read correctly. Note that the barcode cannot be
read if it is scanned with tilted angles or without being covered the whole area.
After reading successfully, the speaker of the device will make a short sound, the
barcode and the read times will be rapidly displayed in the scanning area.
Figure 2-1-1
Figure 2-1-2
Figure 2-1-3
2. Use of Contactless Card
The reading area of the contactless card is on the back cover of battery with the