Product Manual

reading distance is 0-4cm. You can use it by following steps:
1) When running the contactless card reading and writing program, the
contactless card function, which is closed by default, will be opened
automatically.
2) Enter the “Menu” >”DEMO”> select the type (14443A/B or 15693) according
to the label protocol. When placing the card near the battery cover of the
device, the selected contactless card can be read correctly.
3) After reading successfully, the speaker of the device will make a short sound
and the information related to the card will be displayed quickly in the
reading window area.
3. PSAM Card
After the device is installed with PSAM card, you can use "DEMO" for PSAM card
test.
1) Enter the “Menu”>”DEMO”> select "PSAM".
2) Open the PSAM application, if the status bar shows that initiation is
successful, the PSAM card is recognized correctly. Then select the
corresponding card slot, voltage and baud rate and other related settings.
3) Input an APDU instruction in the input box or use the default random
command, then click "Send".
4) After sending, the message returned by the command is displayed in the
result bar, and the status bar will prompt a successful send.
Precautions for Installation and Use
1） Do not damage the USB cable and power adapter. Otherwise, they can't be used
again.
2） Do not use battery chargers or batteries which are not special for the device to
avoid damage to the device.
3） Do not scratch the screen. Do not use pen, pencil or other sharp objects on the
screen.