Monarch Sierra Sport 3R 9430R Printer Quick Reference Guide

Power

Feed

3. Insert the battery with contact end first.

4. Close the battery door.

5. Lock the battery door by sliding

up the tabs.

To remove the battery, partially

open the battery door and tip out

the battery. If the battery door is

completely open, the hinge prevents

the battery from falling out.

Charging the Battery

The printer’s battery must be charged before using it. The battery

can be charged

♦ using the single or four-station charger.

♦ inside the printer using

the plug-in charger for

select printers. However,

not all printers allow

the battery to be

charged inside the

printer.

1. Plug the cable into the

socket located on the side of

the printer.

2. Insert the plug-in charger into an electrical outlet. Charging time

is approximately 1.5 hours.

Using the AC Adapter

Some printers use an AC adapter, which allows you

to use the printer while it is plugged into a wall

outlet. Using the AC adapter eliminates the need to

charge the battery, since the printer operates on AC

current instead.

1. Connect the plug to the AC adapter.

2. Plug the cable into the socket located on the side

of the printer.

3. Plug the AC adapter into an electrical outlet.

Connects to printer