Printer Product Manual

Entering Special Symbols
The symbols below are available for Standard (Std), Reduced
(R), and OCR fonts.
To enter a special symbol, press (Shift), then press the
required key. When you press the shift key, the keyboard
locks in shift mode. Press the shift key again when you’re
finished, to restore the keyboard to normal mode.
Press To Print Fonts
0 = ) Std, R, Bold
1 = ’ (apostrophe) Std, R
2 = 1/2 Std
3 = # Std, R
4 = ? Std, R
5 = = Std, R
6 = ! Std, R
7 = & Std, R
8 = , Std, R, OCR
9 = ( Std, R, Bold
/ = > Std, R, OCR
¢ = + Std, R, OCR
= (blank space) See note below.
$ = % Std, R
. = * (asterisk) Std, R
- = : Std, R, OCR
NOTE: In Format Entry, use the shift/space key to insert a
(reserved space) in prompts. To insert a space in
your data for data entry, use only the space key.
Press the key when you finish entering symbols to restore
the keyboard to normal typing mode.
9400 Series Operator’s Handbook
1-6