Instruction Manual

2-6 System Administrator’s Guide
Sensors
Use this option to view the black mark, die cut, on-demand, and aperture
sensor settings.
To exit, press F at any time.
1. From the Diagnostics menu, select Printer, Sensors, Black Mark.
Black Mark
A/D Value = 170
The acceptable range is between 0 and 255 and the A/D values
change as supply moves past the sensors. The count changes by
at least 100 steps when a black mark is under the sensor. If you
do not notice at least a 100-step difference, you may need to call
Service.
2. Press F to return to the Sensors menu.
3. Select Die Cut.
Die Cut
A/D Value = 170
The acceptable range is between 0 and 255 and the A/D values
change as supply moves past the sensors. The count changes by
at least 100 steps when die cut labels move through the sensor.
If you do not notice at least a 100-step difference, you may need
to call Service.
4. Press F to return to the Sensors menu.