Instruction Manual

Setting Up the Printer 3-7

Adjusting the Print Contrast

Contrast controls the darkness of the printing on your supply. The range

is between -28 to 40. The default is 0.

You may need to adjust your contrast based on which supply you are

using. Linerless supplies may need a higher or lower contrast setting.

Receipt paper requires a lower contrast setting.

For linerless or synthetic supplies, you must select High Energy from the

Stock Energy menu.

1. From the Setup menu, select Printer, Contrast.

Print Contrast

+00

↵ f +

Use A as shown in the following table:

↵

Press A to

Press A to Press A to

Enter

Save the setting

Set the position (+00)

position

Toggle between

positive and negative

Increase the setting

by 10

Increase the setting by 1

2. When the setting you want is displayed, press A under ↵ to save the

setting.

You return to the Printer menu.