Instruction Manual

3-8 System Administrator’s Guide
Adjusting the Supply Position
Use this option to adjust how much supply feeds out of the printer. The
range is between -99 to 99. The default is 0. You may need to adjust the
supply in or out to allow
♦ tags and labels to be removed.
♦ die cut labels to be removed easily.
1. From the Printer menu, select Supply Pos.
Supply Position
+00
↵ f +
Use A as shown in the following table:
↵
f
+
Press A to Press A to Press A to
Enter
Save the setting
Set the position (+00)
1
st
position
2
nd
position
3
rd
position
Toggle between
positive and negative
Increase the setting
by 10
Increase the setting by 1
2. When the setting you want is displayed, press A under ↵ to save the
setting.
You return to the Printer menu.