Instruction Manual

SETTING UP THE PRINTER ........................................................ 3-1

Stock Energy ......................................................................... 3-3

Backlight ............................................................................... 3-4

LCD Contrast ......................................................................... 3-5

Printer ................................................................................... 3-6

Adjusting the Print Contrast.................................................. 3-7

Adjusting the Supply Position ............................................... 3-8

Adjusting the Print Position .................................................. 3-9

Setting the Margin Adjust ................................................... 3-10

Setting the Demand Sensor................................................ 3-11

Setting the Stock Sensor.................................................... 3-14

Selecting the Die Cut Sensor.............................................. 3-15

Selecting the Black Mark Sensor ........................................ 3-16

Selecting the Non-Indexed Sensor ...................................... 3-18

Selecting the Aperture Sensor ............................................ 3-19

Serial Communications ......................................................... 3-21

Baud Rate......................................................................... 3-22

Parity ............................................................................... 3-22

Data Bits........................................................................... 3-23

Stop Bits........................................................................... 3-23

Flow Control...................................................................... 3-24

Power Management .............................................................. 3-25

Low Power (Sleep Mode).................................................... 3-25

Shut Down ........................................................................ 3-26