Instruction Manual

Setting Up the Printer 3-19
5. Press A under ↵ icon to continue. You see a message that the
printer is calibrating the supply.
SUCCESSFUL
↵ X
The printer does not feed supplies while calibrating. The printer
records the sensor value read from the label on the liner.
6. Press A under ↵ or press A under X to return to the Stock Sensor
menu.
7. Press F to return to the Printer menu.
Selecting the Aperture Sensor
1. From the Printer menu, select Stock Sensor, Aperture.
Aperture Sensor
Selected
↵
2. Press A under ↵.
Insert label...
Then hit Enter
↵ ±
3. Load the supply by placing the supply across the exit chute.
Exit chute