operator manual Printers 9800 Series

Loading Labels or Tags
Make sure the printer is configured for the correct supply type.
1.
Open the cover.
2.
Unlock the printhead by turning the retaining latch.
3.
Lift printhead assembly using the printhead tab until the
assembly locks into place.
4.
Place the roll of supply on the supply holder. For labels, the
supply unrolls from the top or the bottom. For tags, make
sure the supply unrolls from the bottom, because tag rolls are
wound face in.
Do not pick up the printer
by the supply holder.
Printhead Tab
Deflector Tab
2-2
Loading Supplies