Printer Product Manual

Introduction 1-3
Status Indicator
A bi-color Status indicator displays the general state of
the Ethernet print server. In normal operation, the Status
indicator flashes orange during power-up self test and
then changes to a solid green when it passes the self-
test.
♦ Solid green indicates a connection has been made
with a 10Base-T hub.
♦ Flashing green rapidly indicates the network
connection is faulty or does not exist.
♦ Flashing green slowly indicates print job activity.
♦ Solid orange for more than 30 seconds indicates the
print server has failed Power On Self Test.
♦ Flashing alternately orange and green for longer than
two minutes indicates the print server is in firmware
download mode.
See Chapter 3, “Troubleshooting” for any problems you
may have.
Test
A test button, located on the side of the Ethernet print
server, is provided to allow detailed configuration
information to be printed.
♦ Restore to Factory Defaults - If the test button is
pressed and held when the printer is turned on until
the Status indicator turns green, the Ethernet print
server configuration parameters are set to Factory
Defaults and a configuration sheet prints.