6094 Four Station Charger Operating Instruction

4. Carefully pull the fuse box straight out. Fuses are

attached, so be careful not to drop or jolt the fuses.

CAUTION

Make sure you are using the correct fuses for the voltage

you select.

5. Using a screwdriver, pull the power selector straight out.

6. Rotate the power selector to the setting required.

7. Push the power selector all the way into the slot. Make

sure the selected number is facing you.

8. Change all fuses to the correct fuses for the voltage

selected. See "Replacing Fuses" in Chapter 4.

9. Replace the fuse box, pushing until it snaps closed.

Power

Selector

6094 Operating Instructions