6094 Four Station Charger Operating Instruction

Replacing Fuses

If the fuses need replacing, you’ll need:

• 1A fuses for 120V and 100V. ...or...

• .5A fuses for 220 and 240V.

When the charger is facing you, the fuse box is located on the

left side of the charger beside the power switch.

1. Turn the power OFF and unplug the power cord.

2. Use the tip of a screwdriver or pen to open the fuse box.

3. Carefully pull the fuse box straight out. Fuses are

attached, so be careful not to drop or jolt the fuses.

4. Check to see if the fuse(s) are blackened, or if the thin

metal wire inside is broken.

5. Remove the old fuse(s) by pulling them from the casing as

shown.

6. Insert the new fuse(s) into the casing.

7. Replace the fuse box, pushing until it snaps closed.

4. Troubleshooting