User manual

16 • Printer Assembly Users Manual Model 545™
Inserting a PCMCIA Card
A PCMCIA card can be used to store fonts, logos, and operating system upgrades.
To insert the card, make sure that the manufacturer’s name is facing the front of the
machine. Insert the card so that the end with the holes goes in first. Slide the card in
until it reaches the back of the slot and the eject button pops out. To eject the card
push in the eject button and then pull the card out. Some machines will ship with a
double slotted card option. If using a single IC card, the card must be inserted into
the slot closest to the rear of the printer.
NOTE: The printer loads the data from the PCMCIA card at power up, after
inserting a PCMCIA - power cycle the machine.
Eject
Button