User manual

Users Manual Model 545™ Control Panel Operation • 51
STOCK OUT NOT BLOCKED
VALUE:000 NEW VALUE:000
This screen follows the "STOCK OUT BLOCKED" screen. Reposition the fabric so
that a splice is within the sensor site path and when NEW VALUE is at the lowest
value press ‘Enter’.
Pressing the MODE / Down Arrow key will take the user back to the "HOLE /
SLOT IN SENSOR" screen. Pressing the EXIT / Up Arrow key will take the user
back to the "HOME" screen
LIFE COUNTS/VERSIONS
PRESS ENTER FOR
L I FE COUNTS /VERS IONS
This screen follows the "CALIBRATE SENSORS" screen. Pressing ENTER will
take the user to the "LIFE COUNTS/VERSIONS" screens.
Pressing the MODE / Down Arrow key will take the user to the "FEATURE
SETUP" screen. Pressing the EXIT / Up Arrow key will take the user back to the
"HOME" screen.
LABEL COUNTER:000000
PRESS ENTER TO RESET
This screen is the first screen under "LIFE COUNTS / VERSIONS". This screen
shows total labels produced since the last counter reset. Pressing the ENTER key
will reset the counter to zero.
Pressing the MODE / Down Arrow key will take the user to the "TOTAL LABLES
PRODUCED" screen. Pressing the EXIT / Up Arrow key will take the user back to
the "HOME" screen.
TOTAL LABELS PRODUCED
0000000000
This screen follows the "LABEL COUNTER" screen. This screen displays the total
labels produced since the printer was built. This counter is NOT resettable by the
user.
Pressing the MODE / Down Arrow key will take the user to the "TOTAL INCHES
OF STOCK" screen. Pressing the EXIT / Up Arrow key will take the user back to
the "HOME" screen.
TOTAL I NCHES OF STOCK
0000000000
This screen follows the "TOTAL LABELS PRODUCED" screen. This screen
displays the total inches since the printer was built. This value is NOT resettable by
the user.
Pressing the MODE / Down Arrow key will take the user to the "CONTROLLER
VERSION" screen. Pressing the EXIT / Up Arrow key will take the user back to the
HOME screen.