User manual

Loading Supplies 3-9
6. Slide a roll of labels onto the supply holder.
If the core diameter on your roll of
labels is 1 inch in diameter, remove
the 1.5-inch supply core adapters
from the supply holder guides.
7. Slide the supply holder guide back onto the end of
the supply holder. If you are using the supply
core adapters for 1.5-inch core supply, make sure
to push the supply core adapters into the ends of
the supply.
8. Insert the ends of the supply holder into the slots
in the supply roll mount.
IMPORTANT INFORMATION
Make sure the plastic line attaching the
supply holder to the printer is tucked down
out of the way of the supply holder and
supply holder guides. Otherwise, the plastic
line may wrap around the supply holder or
get caught on the supply holder guides.
Supply Roll
Mount