User manual

Loading Supplies 3-13
Loading Fan-Fold Supplies
1. Place a stack of fan-fold supplies behind the
printer, printing side up.
You may have to move the printer
to allow room for the supply.
2. Push the external supply guides (located on the
back of the printer) out to their widest position.
3. Adjust the external supply guides so that they
barely touch the edges of the supply.
4. Feed the fan-fold supplies, printing side up, into
the external supply slot on the back of the printer
and through the external supply guides.
5. Press the release levers (located on each side of
the printer) towards the front of the printer to
release the supply door.
6. Lift open the supply door. The supply door
support at the right-hand rear of the printer holds
the supply door open.
7. Leave the supply holder in the printer.
External Supply Guides