User's Manual

Enrolment Card - must be presented when the system is rst powered on
1. Take the enrolment card from the new pack of user cards
2. Present the enrolment card to the reader
3. The reader beeps and the LED’s become lit as the enrolment card is acknowledged
4. All cards in the pack are now valid. The enrolment card can now be returned to it’s pack.
Issuing tokens
1. On each page there are 4 ‘pairs’ of cards - a ‘User card’ and a corresponding ‘Shadow card’
2. Write the name of the user on the shadow card
3. Take the user card from the opposite pouch and issue to the user
4. Keep the card pack containing the shadow cards in a safe place.
1 2 3 4
Bar a user
1. When a card is lost or stolen it is important to bar the card from your system to avoid unauthorized access
2. To bar a card or token take it’s corresponding shadow card from the card pack
3. Present/swipe the shadow card through the reader. This will remove the lost card or token from your system
4. A barred card can re-validated by swiping the enrolment card followed by the user card through the reader.