User's Manual

Door open time (seconds)
1. Take the door open time function card from the starter pack
2. Present/swipe the card to the reader. The reader will start beeping
3. Wait for the required period you wish the door to remain open
4. Present/swipe the card again at the end of the period to set the open time. The beeping will
Silent operation
1. Take the silent operation function card from the starter pack
2. Present/swipe the card to the reader. The reader will beep
3. The reader is now in silent operation mode
4. Present/swipe the card again to disable silent operation mode. The reader will beep twice.
Factory reset
1. Remove the access plate at the rear of the unit. (top two standoff screws)
2. Unplug the battery pack lead.
3. Locate the reset push button at the lower right corner of the circuit board.
4. Hold the button down while reconnecting the battery power. - The unit will bleep 3 times.
5. Press and release the reset button 4 more times - The unit will bleep and reset.
6. Replace the access plate. - The unit will now require re-enrolling