User's Manual

P/N: 4809654
©2005 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
29JUL05 v2.0 05MusGT(4809654v2.0)
8-8
8C. CHARGE AIR COOLER INSTALLA-
TION, cont’d (H.O. KITS ONLY)
e. Attach a length of 5/32" vacuum hose
to bypass valve #2 and route to the
vacuum port of the fuel rail sensor.
f. Cut a section of the factory hose and
install the vacuum TEE that is provid-
ed. (See Fig. 8C-c.)
g. Attach the vacuum hose from the
bypass valve to the TEE.
h. Attach a length of 5/32" vacuum hose
to the previously installed bypass
valve #1. Connect the open end to the
previously installed vacuum line run-
ning to the fuel rail from bypass #2
using the TEE provided. (See Fig.
8C-d.)
Fig. 8C-c
VACUUM TEE
VACUUM HOSE