Manual

elbaegrahceRdelaeS

Battery

hA7V21

V21

USP

INPUT AC 100-240V

50 / 60 Hz

1.2A

OUTPUT DC 13.8V 2A

Ins-30098 2A/12V DC boxed power supply

28/06/2012

Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Saturday from 09:00 - 13:00 (GMT)

01273 811011 support@paxton.co.uk

Technical Support

Back-up battery

PSU

MAINS POWER

Tamper Switch

Layout

12V DC Outputs

Ratings Label

Mains Failure

Monitoring

Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

Status Lights

This LED is on when the input supply has failed - Power is being supplied by the battery.

This LED is on when the input supply is healthy.

Green

Red

Paxton

PAGE 1
28/06/2012 Paxton Ins-30098 2A/12V DC boxed power supply Technical Support 01273 811011 support@paxton.co.uk Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT) Saturday from 09:00 - 13:00 (GMT) Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/ 0V PSU 0V 0V 12V 0V 12V 12V DC Outputs 12V Layout Mains Failure Monitoring INPUT OUTPUT AC 100-240V 50 / 60 Hz 1.2A DC 13.
PAGE 2
Fitting 25mm 116mm 1. Screws and wall plugs are provided in a fitting kit. With reference to the diagrams, determine where the top, central mounting position is required and drill a hole suitable for a No 8 wall plug. 2. Tap in one of the wall plugs. 3. Put in one of the long screws, leaving a suitable gap to the wall surface and slide the cabinet over it. 320mm Metal Cabinet 4. Mark the hole positions for the lower 2 screws. 268mm 5. Remove the cabinet and drill the additional holes. 6.
PAGE 3
Contents in box Boxed Power Supply assembly Instruction set Figure 8 mains lead Description Qty Fitting kit fk1-099 3 Pozi pan self tapping screw - zinc 3 Wall Plugs 1 Cable gland 1 Cable gland lock nut 1 IN4001 Diode 10 Cable tie 4 Cable clip 1 Rubber washer 1 M4 Pan head screw 4 PCB pillar Features Fast/Trickle charge The cabinet can accommodate a 12V / 7Ah battery. Battery backup The battery is continuously charged to keep it at maximum capacity.